Read Sony SS-CS5 Service Manual online
SERVICE MANUAL
Sony Corporation
Published by Sony Techno Create Corporation
SS-CS5
SPECIFICATIONS
SPEAKER SYSTEM
9-893-938-01
2014B33-1
©
2014.02
US Model
Canadian Model
AEP Model
UK Model
Ver. 1.0 2014.02
Photo: The state which removed the front grille.
Speaker system
3-way 3-driver speaker
system, Bass reflex
system, Bass reflex
Speaker units
Woofer: 130 mm (5 1/4 in.),
cone type (1)
Tweeter: 25 mm (1 in.), soft
dome type (1)
Super tweeter: 19 mm (3/4
in.), soft dome type (1)
cone type (1)
Tweeter: 25 mm (1 in.), soft
dome type (1)
Super tweeter: 19 mm (3/4
in.), soft dome type (1)
Rated impedance
6 Ω
Maximum input power
100 W
Sensitivity level
87 dB (2.83V, 1 m)
Frequency range
53 Hz - 50,000 Hz
Dimensions (width/height/depth)
Approx. 178 × 335 × 220 mm
(7 1/8 in. × 13 1/4 in. × 8 3/4
in.), including front grille
(7 1/8 in. × 13 1/4 in. × 8 3/4
in.), including front grille
Mass
Approx. 4.5 kg (9 lb. 14 oz.),
including front grille
including front grille
Supplied accessory
Foot pads (8)
Design and specifications are subject to change
without notice.
without notice.
SS-CS5
2
SECTION 1
DISASSEMBLY
•
This set can be disassembled in the order shown below.
1-1. DISASSEMBLY FLOW
Note: Follow the disassembly procedure in the numerical order given.
1-2. GRILLE
ASSY
SET
1-2. GRILLE
ASSY
(Page
2)
1-7. TERMINAL
ASSY
(TM1)
(Page
6)
1-3. FACE PLATE BLOCK
(Page
(Page
3)
1-4. SPEAKER (2.5 cm)
(TWEETER)
(TWEETER)
(SP2)
(Page
4)
1-5. SPEAKER (19 mm)
(SUPER TWEETER) (SP3)
(Page
4)
1-6. LOUDSPEAKER (13 cm)
(WOOFER)
(WOOFER)
(SP1)
(Page
5)
2 grille assy
1 two bosses
1 two bosses
• JIG
When disassembling the unit, use the following jig (for speaker
When disassembling the unit, use the following jig (for speaker
removal).
Part
No.
Description
J-2501-238-A
JIG FOR SPEAKER REMOVAL
SS-CS5
3
1-3. FACE PLATE BLOCK
:LUHVHWWLQJ
1 six screws
(3.5
(3.5
u 20)
3 terminal
[blue/black]
[blue/black]
3 terminal
[blue]
[blue]
2 Pull out the face plate block.
6 face plate block
5 terminal [gray/black]
4 cushion (STW)
5 terminal [gray]
Note: Cushion (STW) is not reused.
Be sure to exchange it for new parts.
4 cushion (STW)
Note: Cushion (STW) is not reused.
Be sure to exchange it for new parts.
–
5HDUYLHZ–
face plate block
[black]
[gray/black]
[gray]
[gray]
[blue]
[blue/black]
SS-CS5
4
1-4. SPEAKER (2.5 cm) (TWEETER) (SP2)
1-5. SPEAKER (19 cm) (SUPER TWEETER) (SP3)
– Face plate block rear view –
1 three screws
(BVTP3
(BVTP3
u 8)
2 speaker (2.5 cm) (tweeter)
(SP2)
1 two screws
(BVTP3
(BVTP3
u 8)
2 speaker (19 mm) (super tweeter)
(SP3)
– Face plate block rear view –