Read Sony SRS-Z100 Service Manual online
SERVICE MANUAL
Published by Sony Techno Create Corporation
Sony Corporation
Audio&Video Business Group
SRS-Z100
SPECIFICATIONS
ACTIVE SPEAKER SYSTEM
9-889-269-03
2009C05-1
©
2009.03
US Model
Canadian Model
AEP Model
UK Model
E Model
Australian Model
Chinese Model
Ver. 1.2 2009.03
Speaker section
Speaker system
57 mm (full range), 21 mm (tweeter),
magnetically shielded
magnetically shielded
Enclosure type
2Way built-in passive radiator
Impedance
8
Ω
Rated input power
10 W
Maximum input power
20 W
Amplifier section
Rated output
10 W + 10 W (10 % T.H.D., 1 kHz, 8
Ω)
g
u
l
p
i
n
i
m
o
e
r
e
t
s
h
t
i
w
d
r
o
c
g
n
i
t
c
e
n
n
o
C
t
u
p
n
I
(1.5 m)
× 1, Stereo mini jack × 1
Input impedance
4.7 k
Ω (at 1 kHz)
Output
Stereo mini jack
× 1 (PHONES)
General
Power
DC 13 V (supplied AC power adaptor)
Dimensions (w/h/d)
Approx. 84
× 230 × 156 mm
)
r
e
k
a
e
p
s
t
f
e
l
(
g
0
2
0
1
.
x
o
r
p
p
A
s
s
a
M
Approx. 920 g (right speaker)
Supplied accessories
AC power adaptor (1)
Operating Instructions (1)
AC power cords (2) (AEP, UK models)
AC power cord (1) (Except AEP, UK models)
Operating Instructions (1)
AC power cords (2) (AEP, UK models)
AC power cord (1) (Except AEP, UK models)
Design and specifications are subject to change without notice.
Power Sources
Connect the AC power adaptor to the system.
Note on the AC power adaptor
•
•
Use only the supplied AC power adaptor. Do not use any
other AC power adaptor to avoid damaging the speakers.
other AC power adaptor to avoid damaging the speakers.
Polarity of the plug
•
Plug the AC power adaptor into a nearby AC output. In the
case of a problem, unplug from the AC outlet immediately.
case of a problem, unplug from the AC outlet immediately.
•
Do not place the AC power adaptor on a bookshelf or in a
confined place such as a cabinet.
confined place such as a cabinet.
•
Do not use the AC power adaptor in a place subject to liquid
or moisture to avoid fire or electric shock. Furthermore, do not
place liquid-filled vessels, such as a vase, etc., on the AC
power adaptor.
or moisture to avoid fire or electric shock. Furthermore, do not
place liquid-filled vessels, such as a vase, etc., on the AC
power adaptor.
SAFETY-RELATED COMPONENT WARNING!
COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE
WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN
THE PARTS LIST ARE CRITICAL TO SAFE OPERATION.
REPLACE THESE COMPONENTS WITH SONY PARTS
WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN
THE PARTS LIST ARE CRITICAL TO SAFE OPERATION.
REPLACE THESE COMPONENTS WITH SONY PARTS
WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS
MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE 0 SUR
LES DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES
PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE FONC-
TIONNEMENT. NE REMPLACER CES COMPOSANTS QUE
PAR DES PIÈCES SONY DONT LES NUMÉROS SONT DON-
NÉS DANS CE MANUEL OU DANS LES SUPPLÉMENTS
PUBLIÉS PAR SONY.
LES DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES
PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE FONC-
TIONNEMENT. NE REMPLACER CES COMPOSANTS QUE
PAR DES PIÈCES SONY DONT LES NUMÉROS SONT DON-
NÉS DANS CE MANUEL OU DANS LES SUPPLÉMENTS
PUBLIÉS PAR SONY.
SRS-Z100
2
SECTION 1
GENERAL
This section is extracted
from instruction manual.
from instruction manual.
"
Front
Avant
Vorderseite
Parte frontal
Avant
Vorderseite
Parte frontal
Rear
Arrière
Rückseite
Parte
posterior
Arrière
Rückseite
Parte
posterior
Identifying parts
(power) button
Power indicator
VOLUME control
J(headphones) jack
Left speaker
Right speaker
INPUT 1
Power indicator
VOLUME control
J(headphones) jack
Left speaker
Right speaker
INPUT 1
Connecting cord with stereo-mini plug
INPUT 2 jack
R OUT jack
DC IN 13V jack
RB Input cord
R OUT jack
DC IN 13V jack
RB Input cord
SRS-Z100
3
SECTION 2
DISASSEMBLY
•
This set can be disassembled in the order shown below.
2-1. DISASSEMBLY FLOW
SET
2-2. REAR PANEL BLOCK
(Page
(Page
3)
2-3. CORD (WITH PLUG)
(LEFT
(LEFT
SPEAKER)
(Page
4)
2-4. CORD (WITH PLUG)
(RIGHT
(RIGHT
SPEAKER)
(Page
4)
Note: Follow the disassembly procedure in the numerical order given.
2-2. REAR PANEL BLOCK
Note 1:
This illustration sees the set from the rear.
Note 2:
For both left and right rear panel, disassemble through the same procedure.
rear panel block
four screws
(BTP3
×
12)
two screws
(BTP3
×
12)
two claws
SRS-Z100
4
2-3. CORD (WITH PLUG) (LEFT SPEAKER)
Note:
This illustration sees the front panel block from the rear.
white
black
red
front panel block
cord (with plug)
Remove the three solders.
MAIN board
rear panel block
2-4. CORD (WITH PLUG) (RIGHT SPEAKER)
Note:
This illustration sees the front panel block from the rear.
black
red
cord (with plug)
Remove the two solders.
front panel block
rear panel block
CONNECTOR board