Read Sony SRS-X77 Service Manual online
SRS-X77
13
2-5. PANEL (TOP) ASSY
There are a few methods to remove the panel (top) assy.
Remove it by using a method that does not damage the cabinet.
Note 1: The panel (top) assy is not reusable. If it is removed, make sure to replace it with a new one.
Remove it by using a method that does not damage the cabinet.
Note 1: The panel (top) assy is not reusable. If it is removed, make sure to replace it with a new one.
panel (top) assy
adhesive sheet
cabinet
rod, etc
hole
[?/1] button
panel (top) assy
button (POW)
adhesive side
cap (POW)
thin, flat object
1 Insert a jig into the gap between the panel
(top) assy and cabinet, and then lift the
panel (top) assy.
Note
2: Take care not to slide the jig sideways
or apply pressure on the rear side.
3 Completely remove the panel (top) assy.
Note
3: The panel (top) assy is not reusable.
If it is removed, make sure to replace
it with a new one.
2 Hold the lifted part with your hand, and
remove the panel (top) assy while peeling
off the adhesive sheet on the inner side.
4 Completely remove the panel (top) assy.
Note
3: The panel (top) assy is not reusable.
If it is removed, make sure to replace
it with a new one.
2 While tilting the thin, flat object in the
direction of the arrow, insert it into the
adhesive side between the cap (POW)
and button (POW), and then lift the cap
(POW).
Note
Note
4: Make sure not to apply strong
pressure on the [?/1] button.
4 Insert a flathead screwdriver, etc. into the
inner side (adhesive side) of the panel
(top) assy, and tilt the screwdriver to lift
the panel (top) assy.
Note
4: Make sure not to apply strong
pressure on the [?/1] button.
3 Completely remove the cap (POW).
Note
5: The cap (POW) is not reusable.
3 Hold the lifted part with your hand, and
remove the panel (top) assy while peeling
off the adhesive sheet on the inner side.
0HWKRG
1 'LVDVVHPEOHLQWKHIROORZLQJRUGHUĺ
ĺĺĺ
(Refer to the flowchart on page 9)
2 Insert a rod, etc. into the upper hole of the
cabinet, and push up the panel (top) assy.
0HWKRG
1 Insert a thin, flat object into the gap
between the [?/1] button and panel (top)
assy.
0HWKRG
5 Hold the lifted part with your hand, and
remove the panel (top) assy while peeling
off the adhesive sheet on the inner side.
panel (top) assy
panel (top) assy
panel (top) assy
–&URVVVHFWLRQYLHZ–
cap (POW)
cap (POW)
button (POW)
adhesive side
flathead screwdriver, etc.
flathead screwdriver, etc.
panel (top) assy
–&URVVVHFWLRQYLHZ–
6 Completely remove the panel (top) assy.
Note
3: The panel (top) assy is not reusable.
If it is removed, make sure to replace
it with a new one.
panel (top) assy
adhesive sheet
adhesive sheet
Click on the first or last page to see other SRS-X77 service manuals if exist.