SRS-X7 - Sony Audio Service Manual (repair manual). Page 4

CHECKING  METHOD  OF  NETWORK  CONNECTION
It is necessary to check the network connection, when replacing 
the WiFi module (Ref. No. WiFi1). Check the connection of wire-
less LAN, according to the following method.

Necessary Equipment:
• 

Access point supporting WPS

Procedure:
1.  Slide the [NETWORK OFF/ON] switch in the direction of 

“ON”.

2.  Press the [?/1] button to turn the power on. Check that the 

[LINK] LED is turns off.

3.  Touch the [NETWORK] button to select the network function.
4.  Press and hold the [WPS] button, the beep sound occurs, the 

[LINK] LED is green blinking.

5.  Press the [WPS] key on the access point.
6.  Wireless LAN connection is completed. Check that the [LINK] 

LED is green lights up.

Necessary Equipment:
• Router
• LAN 

cable

Procedure:
1.  Connect the unit to the router with the network LAN cable.
2.  Slide the [NETWORK OFF/ON] switch in the direction of 

“ON”.

3.  Press the [?/1] button to turn the power on.
4.  Touch the [NETWORK] button to select the network function.
5.  Wired LAN connection is completed. Check that the [LINK] 

LED is orange lights up.

ABOUT  THE  DELETION  METHOD  OF  USER  REGIS-
TRATION  OF  SEN  SERVICE
By checking device ID label, user registration of the internet video 
of this unit can be compulsorily reset.
(Device ID label is “the hexadecimal number of 12 fi gures”)
When this unit needs compulsive reset, please check device ID 
label and consult with a service headquarters.

Procedure:
1.  Check the device ID label stuck on the bottom side of the unit.
2.  Device ID indicated on the label is recorded on a memorandum 

etc.

 

(Device ID label is “the hexadecimal number of 12 fi gures”)

Device ID:       XXXXXXXXXXXX

MAC Address: XX-XX-XX-XX-XX-XX

Note: As for US and Canadian models, device ID label may be stuck on 

the model number indication side.