SRS-NWM10 - Sony Audio Service Manual (repair manual). Page 3

Read Sony SRS-NWM10 Service Manual online

3
SRS-NWM10
SECTION  1
GENERAL
This section is extracted from
instruction manual.
D
C
B
1
(rear)
(arrière)
(parte posterior)
2
Three R6 (size AA) batteries
Trois piles R6 (format AA)
Tres pilas R6 (tamaño AA)
A
to DC IN 5.2 V jack
Vers la prise DC IN 5,2 V
a la toma DC IN 5,2 V
AC power adaptor (supplied)
Adaptateur secteur (fourni)
Adaptador de alimentación de ca
(suministrado)
to wall outlet
Vers la prise murale
a la toma de pared
E
(rear)
(arrière)
(parte posterior)
F
VOLUME
STANDBY
ON
POWER/CHARGE  indicator
Témoin POWER/CHARGE
Indicador POWER/CHARGE
POWER
*
“Walkman” is a registered trademark of Sony Corporation to represent Headphone Stereo products.
« Walkman » est une marque déposée par Sony Corporation pour représenter les produits stéréo dotés d’écouteurs.
“Walkman” es una marca registrada de Sony Corporation que representa los productos audífonos estéreo.
To LINE OUT or to headphones
jack (stereo mini jack)
Vers LINE OUT ou vers la prise de
casque (mini-prise stéréo)
a la toma LINE OUT o a la toma de
auriculares (minitoma estéreo)
CD/MD Walkman
*
, PC, etc.
Walkman
*
 CD et MD, Ordinateur ou un autre appareil
Walkman de CD/MD
*
, PC, etc.
To multiple connector
(personal computer connection)
Vers un connecteur multibroche
(raccordement d’un ordinateur)
A un conector múltiple
(conexión a una computadora
personal)
PC, etc.
Ordinateur, etc.
PC, etc.
Series NW-A1000
Series NW-A3000
Série NW-A1000
Série NW-A3000
Serie NW-A1000
Serie NW-A3000
To multiple connector
(Walkman
*
 connection)
Vers un connecteur multibroche
(raccordement d’un Walkman
*
)
A un conector múltiple
(conexión al Walkman
*
)
Installing
Installation
Instalación
Removing
Retrait
Extracción
USB cable (supplied with NW-A1000
and NW-A3000 series Walkman)
Câble USB (fourni avec les Walkmans
des séries NW-A1000 et NW-A3000)
Cable USB (suministrado con los
Walkman de las series NW-A1000 y
NW-A3000)
RK-G136 connecting cord
(optional)
Cordon de raccordement
RK-G136 (en option)
Cable de conexión RK-
G136 (opcional)
VOLUME
(rear)
(arrière)
(parte posterior)
(front)
(avant)
(parte frontal)
Power Sources
Using on house current
(See fig. 
A)
When the AC power adaptor is connected to the system,
internal batteries are automatically disconnected.
Setting the stand
(See fig. 
C)
Retract into the stand when carrying the speaker.
Installing/Removing the
attachment
(See fig. 
D)
Installing the attachment according to the Walkman
you are using
Use the dedicated attachment for either NW-A1000 or
NW-A3000 series. The corresponding model number is
marked on the rear of the attachment. Exchange attachments,
as shown.
Hooking up the speaker
(See fig. 
E)
Connect the speaker to the source equipment.
When the system is connected to the monaural jack
of a radio, etc., 
the sound may not come through the right
speaker. In such a case, use the optional* plug adaptor PC-
234S or PC-236MS.
To connect to a stereo phone-type
headphones jack
Use the optional* plug adaptor PC-234S/PC236MS or
connecting cord RK-G136/RK-G138.
* The above optional accessories are not provided in some areas.
Notes
• NW-A1000/A3000 series use the multiple connector (Walkman
connection).
• Do not carry the speaker with a Walkman set on the multiple
connector, as malfunction may result.
Playing back sound of the
connected device
(See fig. 
F)
Adjust VOLUME to minimum to avoid any sudden loud
sounds that may hurt your ears and set the volume of the
connected device to a moderate level.
1
Disconnect the USB cable used for the
speaker and personal computer, or set
the POWER switch of the connected
personal computer to OFF.
• When a USB cable is connected between the speaker
and a personal computer, no sound will be heard from
a Walkman set on the multiple connector, as data
transfer mode takes place. Sound from the device
connected to INPUT will be heard instead.
2
Set the POWER switch to ON.
The POWER/CHARGE indicator lights up.
3
Play back the connected device.
Adjust VOLUME accordingly.
• When both a Walkman set on the multiple connector
and a device connected to INPUT are used, both
sounds can be heard. Control on/off on the connected
device itself.
4
Set the POWER switch to OFF after
using.
The POWER/CHARGE indicator goes off.
Notes
• If connecting the speaker to a device with built-in a radio or
tuner, radio reception may not occur or sensitivity may be
reduced significantly.
• Release the bass boost function of the connected Walkman, etc.,
to avoid distortion.
• The USB cable connecting the speaker with personal computer
is used for transferring Walkman’s data and recharging. When
playing back sound of a personal computer using the speaker,
connect through the INPUT.
• If the connected device’s headphone output has a line switch,
better sound will be heard if it is set to on. See the operating
instructions of the connected device.
Battery installation 
(See fig. 
B)
Battery replacement
When the batteries are weak, the POWER/CHARGE
indicator will start flickering and become faint, or the
playback sound will become distorted or unstable. In such a
case, replace all the batteries with new ones.
Page of 16
Display

Click on the first or last page to see other SRS-NWM10 service manuals if exist.