Read Sony SRS-NWGU50 Service Manual online
SRS-NWGU50
SRS-NWGU50
5
5
SECTION 3
TEST MODE
VERSION DISPLAY MODE
Procedure:
1. Press the [
Procedure:
1. Press the [
?/1
] button to turn the power on.
2. Press the button in order of the [INPUT]
→ [VOLUME +] →
[VOLUME –] within three seconds after pressing three buttons
of the [INPUT], [VOLUME –] and [VOLUME +] simultane-
ously.
of the [INPUT], [VOLUME –] and [VOLUME +] simultane-
ously.
3. All LEDs blinks, and enter the version display mode.
4. Execute the following operation, and confi rm the microcom-
4. Execute the following operation, and confi rm the microcom-
puter version.
X . X X : microcomputer version
The
[
%
] indicator blinks when the [VOLUME +] but-
ton is pressed, and it is shown by the blinking fre-
quency.
quency.
The [BASS] indicator blinks when the [VOLUME –]
button is pressed, and it is shown by the blinking fre-
quency.
button is pressed, and it is shown by the blinking fre-
quency.
The [INPUT] indicator blinks when the [INPUT] but-
ton is pressed, and it is shown by the blinking fre-
quency.
ton is pressed, and it is shown by the blinking fre-
quency.
5. Press the [
?/1
] button to release the version display mode.
2-3. MAIN BOARD
Note: This illustration sees the set from bottom side.
2 four screws
(B2.6
u 6)
7 MAIN board
5 connector (CN300)
1 speaker connector (CN101)
6 wire (flat type) (9 core)
(CN100)
4 connector (CN301)
3
2-4. SPEAKER BOX ASSY
Note: This illustration sees the set from bottom side.
2 three screws (BV4 u 16)
6 speaker box assy
4
1 speaker connector (CN101)
3 chassis
3 chassis
5 top cover block
2 three screws (BV4 u 16)
Click on the first or last page to see other SRS-NWGU50 service manuals if exist.