SRF-MQ11 - Sony Audio Service Manual (repair manual). Page 3

Read Sony SRF-MQ11 Service Manual online

3
SRF-MQ11
SECTION 1
GENERAL
This section is extracted
from instruction manual.
When Disposing of the Radio
This radio has a built-in Nickel Metal Hydride battery. When you recycle the
battery, remove it following the procedure below.
Certain countries/regions may regulate disposal of the battery
used to power this product.
Please consult with your local authority.
Note
Never disassemble this radio excepts when disposing of it.
To remove the Nickel Metal Hydride battery
The Nickel Metal Hydride battery is stored in the left unit.
1
Remove both screws on the left cabinet (as
shown in the illustration) using a Phillips
screw driver.
2
Remove the cabinet.
3
Dettach the connector shown by the arrow in
the illustration and then remove the screw on
the circuit board.
4
Raise the circuit board and remove the Nickel
Metal Hydride battery using a thin object, as
the battery is secured with tape.
L (left)
Nickel Metal Hydride battery
C
onnector
Cabinet
OFF•ON/
MEGABASS
Jog Lever (MODE/ENTER)
Molette (MODE/ENTER)
Display
Afficheur
VOL
*
SENS DX/LOCAL
AUDIO IN
L (left)
L (gauche)
Cord
Cordon
Driver unit
Oreillettes
DC IN 4.5 V
R (right)
R (droite)
*
There is a tactile dot beside volume to show the
direction to turn up the volume.
Un point tactile, situé à côté de la molette de
volume, indique le sens dans lequel il faut tourner
pour augmenter le volume.
Page of 25
Display

Click on the first or last page to see other SRF-MQ11 service manuals if exist.