Read Sony SCD-XE670 Service Manual online
5
SCD-XE670
HOW TO OPEN THE TRAY WHEN POWER SWITCH TURNS OFF
DISPLAY BOARD SERVICE POSITION
In checking the DISPLAY board, prepare jig (extension cable J-8000-024-A : 1.00 mm Pitch, 12 cores, Length 300 mm.)
tray
tapering driver
cam (66)
1
Insert a tapering driver (3 mm in diameter)
in the hole at the bottom of the unit,
turn the cam (66) fully in the direction of arrow A.
in the hole at the bottom of the unit,
turn the cam (66) fully in the direction of arrow A.
A
MAIN board
(CN706)
(CN706)
DISPLAY board
(CN801)
(CN801)
Connect jig (extension cable J-8000-024-A)
to the DISPLAY board (CN801) and
MAIN board (CN706).
to the DISPLAY board (CN801) and
MAIN board (CN706).
Click on the first or last page to see other SCD-XE670 service manuals if exist.