SCD-XB940 (serv.man2) - Sony Audio Service Manual (repair manual). Page 7

Read Sony SCD-XB940 (serv.man2) Service Manual online

7
3
History clear
• How to clear all history data
For the items with “Clear History?” message, press 
[       AMS       ]
controller, and all emergency history data and all laser lighting
hours are cleared to 0.
• How to clear individual data
1
Emergency history clear
Press 
[DISPLAY MODE]
[CLEAR]
 buttons on the remote com-
mander in this order.
2
Laser lighting hour clear
Press 
[SACD/CD]
[CLEAR]
 buttons on the remote commander
in this order.
3
Setup clear
Press 
[REPEAT]
[CLEAR]
 buttons on the remote commander in
this order.
Five backup data of 
[PLAY MODE]
[CLEAR]
[SACD/CD]
,
[TIME/TEXT]
[DIGITAL FILTER]
 are cleared to the initial data.
5. Ver Info Menu
From the “Test Mode Menu”, rotate 
[       AMS       ]
 controller
clockwise to select “5. Ver Info”. Press
[       AMS       ]
 control-
ler, and “Version Info” message will be displayed. Rotating the
[       AMS       ]
 controller clockwise switches to the following dis-
play where the ROM version, date of creation, servo DSP version,
and checksum are displayed.
[Example]
V1.00
00/02/14
SrvDSP
1.000
RomCsum 711C
6. RF Jit Disp
From the “Test Mode Menu”, rotate 
[       AMS       ]
 controller
clockwise to select “6. RF Jit Disp”. Press 
[       AMS       ]
 control-
ler, and then “Set Disc” message will be displayed. Set a disc and
press 
[       AMS       ]
 controller, and “Sinup...” will be displayed,
then the jitter will be measured and displayed. To exit from this
mode, press the X button.
 <Jitter measurement and display example>
CD
22
2A 000000
Sector address
CLV status
Jitter value
 Disc type (auto check)
SL : Single layer disc
HC : Hybrid layer disc, CD layer
HD : Hybrid layer disc, SACD layer
DL : Dual layer disc
CD : CD disc
1
The disc type is checked automatically.
2
For a hybrid disc, rotating the 
[       AMS       ]
 controller can
switch the layer during jitter adjustment. Also, rotating the
[       AMS       ]
 controller can jump to inner track, middle track,
or outer track.However, the address is fixed. Music cannot be
searched. For a dual layer disc, a jump between layers is pos-
sible.
1. Play HD-HL0
2. Play CD-HL1
3. Jp Md1 Track
4. Jp Inn Track
5. Jp Out Track
6. Jp DL0 -> DL1
7. Jp DL1 -> DL0
3
Press A button to change the disc.
l         L
l         L
l         L
l         L
l         L
7. PDM Mode Menu
This mode is not normally used.
8. CDM Adj Menu
This mode is not normally used.
9. Set Up Init Menu
From the “Test Mode Menu”, rotate 
[       AMS       ]
 controller
clockwise to select “7. Set Up Init”. Press 
[       AMS       ]
controller, and “Initialized” will be displayed, then “Reset? Y/N”
will be displayed. Press again 
[       AMS       ]
 controller, and
“Restart ...” will be displayed, and then the player will be reset
and restarted. (At the restart, the set exits from the Test mode.)
10. Sld Ship Pos Menu
Moving sled  the fuctory set up position.
Mechanism error code
Emergency
Category
Emergancy Name
 Code
Electrical
SSI ERR
10
DSP ERR
11
EEP ERR
12
EEP HOURS METER WRITE ERR
13
DSP BUSY TIME OUT
14
EEP CHECK SUM NG
15
DSP BUSY TIME OUT ESCAPE
16
Mechanism
TILT SLED RESET NG
20
TILT MOVE NG
21
TILT REQ POSI NG
22
SLED MOVE NG
23
SLED REQ POSI NG
24
Adjustment
ADJ TRK BAL NG
30
ADJ TRK GAIN
31
ADJ FCS BAL NG
32
ADJ FCS BIAS NG
33
ADJ FCS GAIN
34
ADJ TILT NG
35
ADJ EQ BOOST NG
36
ADJ GD NG
37
ADJ LAST JITTER NG
38
ADJ GAIN RANGE OVER
3F
Focus
FOCUS NG
F1
FOCUS JUMP COUNT OVER
41
Spindle
CLV LOCK NG
1F
SPDL BRAKE COUNT OVER
51
Sheek
SACD REQ ADR NG
60
CD REQ ADR NG
61
CD REQ INDEX NG
62
SACD SEEK COUNT OVER
63
CD SA SEARCH COUNT OVER
64
CD INDEX SEARCH COUNT OVER
65
Date
SACD INFO NG
70
CD INFO TIME OUT
71
Other
RECOVERY DISC CHECK NG
DF
RECOVERY COUNT OVER
81
DISC CHECK ERR
DF
DISC CHECK TIME OUT
83
INVALID CMD CODE
84
INVALID CMD
85
DUMMY JOB
86
NEXT MODE NONE
87
l         L
l         L
l         L
l         L
l         L
l         L
l         L
Page of 22
Display

Click on the first or last page to see other SCD-XB940 (serv.man2) service manuals if exist.