Read Sony SCD-XA777ES Service Manual online
6
SCD-XA777ES
Note:
Follow the disassembly procedure in the numerical order given.
D-POWER/POWER BOARDS AND RF BOARD SERVICE POSITION
1
Remove the case.
2
Turn over the set.
4
two bottom plates
3
four screws (3
×
8)
3
eight screws (3
×
8)
D-POWER board
POWER board
INSTALLATION TWO WIRES (FLAT TYPE) (25/35 CORE)
Note: When the wire (flat type) (35 core) is disconnected
from the RF board, then it is again connected,
disconnect the wire (flat type) (25 core) once,
and reconnect the wire (flat type) (35 core) first.
disconnect the wire (flat type) (25 core) once,
and reconnect the wire (flat type) (35 core) first.
wire (flat type) (35 core)
wire (flat type) (25 core)
RF board
– BOTTOM VIEW –
Click on the first or last page to see other SCD-XA777ES service manuals if exist.