Read Sony SCD-XA3000ES Service Manual online
9
SCD-XA3000ES
SECTION 2
GENERAL
This section is extracted from
instruction manual.
instruction manual.
Front Panel Parts
Descriptions
Descriptions
5
A OPEN/CLOSE button
Press to open the disc tray.
Press to open the disc tray.
6
H button
Press to start play.
Press to start play.
7
X button
Press to pause play.
Press to pause play.
8
x button
Press to stop play.
Press to stop play.
9
PHONES
Connect the headphones.
During playback of a Multi-channel Super Audio CD,
the same signal that is output from the ANALOG
5.1CH FRONT L/R jacks is output from the PHONES
jack.
Connect the headphones.
During playback of a Multi-channel Super Audio CD,
the same signal that is output from the ANALOG
5.1CH FRONT L/R jacks is output from the PHONES
jack.
0
PHONE LEVEL
Adjust the headphones volume.
Adjust the headphones volume.
PHONES
PHONE LEVEL
MIN
MAX
PUSH
ENTER
AMS
TIME/TEXT
SACD/CD
MENU
MULTI/2CH
POWER
When you turn the
. AMS > dial
counterclockwise by one click, you go back to the
preceding track; when you turn the
preceding track; when you turn the
. AMS >
dial clockwise by one click, you go to the succeeding
track.
track.
qa
MENU
Press to enter the menu.
Press to exit from the menu and return to the normal
display.
Press to enter the menu.
Press to exit from the menu and return to the normal
display.
qs
MULTI/2CH button
Press to select the playback area when the 2 channel +
Multi-channel Super Audio CD is loaded.
Press to select the playback area when the 2 channel +
Multi-channel Super Audio CD is loaded.
qd
Remote sensor
qf
Display window
Shows various information.
Shows various information.
qg
. AMS > dial (AMS: Automatic Music Sensor)
1
POWER switch
Press to turn on the player.
Press to turn on the player.
2
TIME/TEXT button
Each time you press the button, the playing time of the
track, the total remaining time on the disc, or TEXT
information appears in the display.
Each time you press the button, the playing time of the
track, the total remaining time on the disc, or TEXT
information appears in the display.
3
SACD/CD button
Each time you press the button while playing back a
hybrid disc, the layer to be played back switches
between the HD (Super Audio CD) layer and the CD
layer.
Each time you press the button while playing back a
hybrid disc, the layer to be played back switches
between the HD (Super Audio CD) layer and the CD
layer.
4
Disc tray
Press
Press
A OPEN/CLOSE to open/close the disc tray.
Rear Panel Parts Descriptions
ANALOG
L
L
R
R
2CH OUT
5. 1CH OUT
OUT
FRONT
COAXIAL
OPTICAL
SURROUND CENTER
SUB
WOOFER
DIGITAL(CD)
1
ANALOG 2CH OUT L/R jacks
Connect to an audio component (stereo/2 channel)
using the audio connecting cord.
Connect to an audio component (stereo/2 channel)
using the audio connecting cord.
2
ANALOG 5.1CH OUT jacks
Connect to an amplifier equipped with the 5.1CH
input jacks (Multi-channel amplifier, AV amplifier,
etc.) using the audio connecting cords.
Connect to an amplifier equipped with the 5.1CH
input jacks (Multi-channel amplifier, AV amplifier,
etc.) using the audio connecting cords.
3
DIGITAL (CD) OUT COAXIAL connector
Connect to an audio component using the coaxial
digital cable.
Connect to an audio component using the coaxial
digital cable.
4
DIGITAL (CD) OUT OPTICAL connector
Connect to an audio component using an optical
digital cable.
Connect to an audio component using an optical
digital cable.
Note
Only the audio signals of the CD can be output from the
DIGITAL (CD) OUT connectors shown in 3 and 4. Those of the
Super Audio CD cannot be output through DIGITAL (CD) OUT.
Only the audio signals of the CD can be output from the
DIGITAL (CD) OUT connectors shown in 3 and 4. Those of the
Super Audio CD cannot be output through DIGITAL (CD) OUT.
Click on the first or last page to see other SCD-XA3000ES service manuals if exist.