SCD-XA1200ES - Sony Audio Service Manual (repair manual). Page 13

13

13

SCD-XA1200ES

R892

R893

IC712

Perform this setting when the EEPROM (IC702) on the MAIN board
is replaced.
Procedure:

1. While pressing the [MENU] button and  

.

 AMS 

>

  jog press

the [POWER] button to turn the power on and enter the Test
Mode and display “DIAG MODE”.

2.

.

 AMS 

>

  jog is turned and “8F” is selected.

3.

.

 AMS 

>

  jog is pressed and “INIT START” is displayed.

4. Then confrm “INITIAL OK” is displayed.
5. Press the [POWER] button to turn the power off.
6. Press the [POWER] button to turn the power on.
7. Press the [MENU] button.
8.

.

 AMS 

>

  jog is turned and “M/2ch SEL” is selected.

9.

.

 AMS 

>

  jog is pressed.

10.

.

 AMS 

>

  jog is turned and “SEL – 2ch” is selected.

11.

.

 AMS 

>

  jog is pressed.

12. Press the [POWER] button to turn the power off.