SCD-CE595 - Sony Audio Service Manual (repair manual). Page 6

6

Press three buttons  m  , [PUSH ENTER] and [POWER] simulta-
neously, The test mode becomes active. Then all segments of the
fluorecent indicator tube are turned on.

1. Grid of all segments lights up sequentially starting from 1G to

16G.

2. The vertical line (total 5 lines) of all grids lights up sequentially

in the range of 5G to 16 G starting from the left.

3. The horizontal line of (total 7 lines) of all grids lights up

sequentially in the range of 5G to 16G starting from the top.

1. The message “SIRCS CHECK” is displayed on the fluorecent

indicator tube.

2. With the machine in the status that is set in step 2, press any

on the remote commander. The machine enters the key check
standby state. (When the  H  key or the  x  key is pressed,
the reception check is canceled.)

1. In the key check mode, the fluorecent indicator displays “KEY

CHECK**”. Each time a button is pressed, “**” value.
However, once a button is pressed, it is no longer taken into
account.

2. To  exit from this mode, the message “JOG CHECK” is

displayed.

1.  After the key check is completed, turn JOG clockwise to turn

on the calendar segments sequentially. When the segment “15”
is confirmed, turn JOG counter-clockwise that turns off the
calendar segment. When the segment “1” is confirmed, this is
the end of check.

1. After all the checks are completed, confirm to see that the

display “TEST-END” appears. The message indicates that
the check is ended normally.

2. Press the [POWER]  button to turn off the main power and

disconnect the power plug from the wall outlet.