SCD-C333ES - Sony Audio Service Manual (repair manual). Page 5

5

Remote Parts Descriptions

1 CONTINUE button (12)

Press to resume normal play from Shuffle Play or
Program Play.

SHUFFLE button (18)
Press to select Shuffle Play.

PROGRAM button (19)
Press to select Program Play.

2 DIGITAL FILTER button (20)

Press to select the digital filter type when a CD is
played.

3 DISC/CAPS button (15, 23)

Press to select the disc.
Press to select the capital letter.

4 Number buttons (15)

Press to enter the track numbers.

5

i10 button (16)
Press to locate a track numbered over 10.

6 REPEAT button (17)

Press repeatedly to play all tracks or only one track on
the disc.

7 NAME INPUT button (23)

Press to enter the name input mode.

8

H button (12)
Press to start play.

X button (12)
Press to pause play.

x button (12)
Press to stop play.

9 AMS ./> (AMS: Automatic Music Sensor)

buttons (16)
Press to locate a specific track.

0

m/M buttons (16)
Press to locate a portion you want to play within a
track.

qa DISC SKIP +/– buttons (11)

Press to select the disc.

qs CD1/2 (COMMAND MODE) switch (5)

Select the command mode.

qd DISPLAY MODE button (13)

Press to turn off the information.

qf TIME/TEXT/SPACE button (13, 23)

Each time you press the button, the playing time of the
track, the total remaining time on the disc, or TEXT
information appears in the display.
Press to insert a space.

qg ENTER button (23)

Press to decide the selection.

qh CLEAR button (19)

Press to delete a programmed track number.

qj CHECK button (19)

Press to check the programmed order.

qk SACD/CD button (10)

Each time you press the button while the Hybrid disc
(page 11) is loaded, the layer changes between an HD
layer (the SACD/CD LED turns on) and CD layer (the
SACD/CD LED turns off).

CONTINUE SHUFFLE

PLAY MODE

PROGRAM

1

2

3

4

5

6

7

8

10/0

9

SPACE

TIME/TEXT

CAPS

DISC

REPEAT

CHECK

AMS

CLEAR

INPUT

NAME

SACD/CD

>10

ENTER

MODE

DISPLAY

FILTER

DIGITAL

DISC SKIP

–

+

CD1

ABC

DEF

ABC

JKL

MNO

GHI

TUV

WXYZ

PQRS

CD2

Rear Panel Parts Descriptions

1 ANALOG OUT jacks (5)

Connect to an audio component using the audio
connecting cord.

2 DIGITAL (CD) OUT OPTICAL connector (5)

Connect to an audio component using an optical
digital cable.

3 DIGITAL (CD) OUT COAXIAL connector (5)

Connect to an audio component using the coaxial
digital cable.

4 CONTROL A1   jack (5)

Connect to the Sony audio component using the
monaural (2P) mini-plug cord.

Only the audio signals of the CD can be output from the
DIGITAL (CD) OUT connectors shown in 2 and 3. Those of
the Super Audio CD cannot be output through DIGITAL (CD)
OUT.

R

L

OUT

ΙΙ

OUT

COAXIAL

OPTICAL