Read Sony SCD-555ES Service Manual online
69
Error List
An error occurring during the check in the aging mode of the test mode is displayed automatically (scroll display) immediately when the
error occurred.
error occurred.
Error display is as follows.
Error name, Disc type, IN SW (Sled in switch state), FOK (FOK signal state), LOCK (LOCK signal state), From (Displayed if effective),
To (Displayed if effective), Aging times (Displayed in aging mode only)
Display example
ACCESS MOVE ERROR : SACDSL : IN SW 1 FOK 0 LOCK 0 : FROM 205663 : TO 2461601 : TIMES 5
(Error name) (Disc type) (Sled in switch, FOK, LOCK signal state) (Relative address) (Relative address)(Aging times)
Error name, Disc type, IN SW (Sled in switch state), FOK (FOK signal state), LOCK (LOCK signal state), From (Displayed if effective),
To (Displayed if effective), Aging times (Displayed in aging mode only)
Display example
ACCESS MOVE ERROR : SACDSL : IN SW 1 FOK 0 LOCK 0 : FROM 205663 : TO 2461601 : TIMES 5
(Error name) (Disc type) (Sled in switch, FOK, LOCK signal state) (Relative address) (Relative address)(Aging times)
Display Items List:
Display items
Description
Remarks
Error name
tRefer to the error display list
IN SW
Sled in switch state when an error occurred
0: switch off Not limit in
1: switch on Limit in (Optical pick-up is at most inward track)
0: switch off Not limit in
1: switch on Limit in (Optical pick-up is at most inward track)
FOK
FOK signal state when an error occurred
FOK signal Is focus on?
0: FOK L (Focus off), 1: FOK H (Focus on)
FOK signal Is focus on?
0: FOK L (Focus off), 1: FOK H (Focus on)
LOCK
LOCK signal state when an error occurred.
LOCK signal Is PLL lock?
0: LOCK L Not lock, 1: LOCK H Lock
LOCK signal Is PLL lock?
0: LOCK L Not lock, 1: LOCK H Lock
From
Displayed if effective in the error item
Disc PSN (relative address) is
tRefer to the error display list
displayed in case of access error
To
Displayed if effective in the error item
Disc PSN (relative address) is
tRefer to the error display list
displayed in case of access error
6-5. AGING MODE
(• Perform as necessary)
The aging can be performed to the set in the test mode. The aging
can be continued by the set number of times or until an error oc-
curs.
In the aging, the following operations are repeated.
Load intDisc detecttServo ontAuto adjustmenttTOC
readingtPlay of first track for 5 secondtPlay of last track for 5
secondtPlay of first track for 5 secondtLoad out
The aging can be performed to the set in the test mode. The aging
can be continued by the set number of times or until an error oc-
curs.
In the aging, the following operations are repeated.
Load intDisc detecttServo ontAuto adjustmenttTOC
readingtPlay of first track for 5 secondtPlay of last track for 5
secondtPlay of first track for 5 secondtLoad out
Setting Method:
1. After setting the test mode, rotate the
1. After setting the test mode, rotate the
[ AMS ]
dial to
select “94. SET AGING” and press the
[ AMS ]
dial
to enter.
2. When “AGING TIMES” is displayed, rotate the
[ AMS ]
dial to set the number of aging times. (For the number of times,
every 10 times can be set. Setting 0 (zero) eliminates the count
limitation where the aging is repeated until an error occurs)
every 10 times can be set. Setting 0 (zero) eliminates the count
limitation where the aging is repeated until an error occurs)
Note:
Do not perform unmanned overnight aging..
3. Press the
[ AMS ]
dial, and “AGING START” will be
displayed instantaneously, then “DISC IN & JOG ON” will be
displayed and the tray will come out automatically.
displayed and the tray will come out automatically.
4. Place a disc (CD or SACD SL disc) on the tray, and press the
[ AMS ]
dial to start the aging.
5. At the completion of aging by the set number of times, the
tray will come out automatically and the check will stop.
Typical time required for aging About 1 hour/100 times
“AGING SUCCESS!” will be displayed if no error occurred
in the aging, or the error will be displayed if an error occurred.
(Refer to the following error list)
Typical time required for aging About 1 hour/100 times
“AGING SUCCESS!” will be displayed if no error occurred
in the aging, or the error will be displayed if an error occurred.
(Refer to the following error list)
6-6. SHIPPING MODE
The repaired set must be initialized, and for this purpose the set
should be set to the shipping mode.
should be set to the shipping mode.
Setting Method:
1. After setting the test mode, rotate the
1. After setting the test mode, rotate the
[ AMS ]
dial to
select “8d Set Up Init” and press the
[ AMS ]
dial to
enter.
2. “8D 000000000 00” will be displayed, and if the scroll starts
in the left direction, the set initialization has completed
3. Press the
[POWER]
button to turn the power off.
Note:
Take care not to leave the test disc in the set.
l
L
l
L
l
L
l
L
l
L
l
L
l
L
Click on the first or last page to see other SCD-555ES service manuals if exist.