Read Sony SCD-555ES Service Manual online
13
8
screw (PTPWH3
×
8)
0
roller (L)
9
Raising the stable lock (L/R) Ass’y simultaneously
in the arrow
in the arrow
D
direction, remove the base unit (DVBU4)
from the chassis (outseat).
Note: The stable lock (L/R) Ass’y will attempt to
return in the reverse direction of arrow
D
by a spring force. Therefore, take care not
to break the shaft of stable lock (L/R) Ass’y
when removing the stable lock (L/R) Ass’y
from the base unit (DVBU4).
to break the shaft of stable lock (L/R) Ass’y
when removing the stable lock (L/R) Ass’y
from the base unit (DVBU4).
stable lock (R) ass’y
stable lock (L) ass’y
In removing the optical pick-up (KHM-230AAA/J1NP)
after removing the base unit (DVBU4),
perform the optical pick-up (KHM-230AAA/J1NP) removal
procedure after step 5 on page 12.
after removing the base unit (DVBU4),
perform the optical pick-up (KHM-230AAA/J1NP) removal
procedure after step 5 on page 12.
chassis (outseat)
D
D
BASE UNIT (DVBU4)
1
two claws
1
two claws
S002
S001
cover (CAM)
2
Up the SWITCH board in the
direction of arrow
direction of arrow
A
.
Note: Take care not to break the shaft of
the switch (S001, S002) when raising
the SWITCH board.
the SWITCH board.
A
C
B
4
limiter (L)
3
screw
(BVTT3
(BVTT3
×
6)
5
screw
(BVTT3
(BVTT3
×
6)
6
limiter (R)
7
Insert a taper driver into the cover (CAM),
and rotate in the arrow
and rotate in the arrow
B
direction to raise
the base unit (DVBU4) in the arrow
C
direction.
(Chuck release state)
Click on the first or last page to see other SCD-555ES service manuals if exist.