Read Sony SA-WGT5D Service Manual online
SA-WGT5D
9
TEST DISCS
Use following TEST DISC when this unit confi rms the operation
and checks it.
Use following TEST DISC when this unit confi rms the operation
and checks it.
• For
CD
Part No.
Description
3-702-101-01 DISC
(YEDS-18),
TEST
4-225-203-01 DISC
(PATD-012),
TEST
J-2501-307-A DISC
(HLX-A1),
TEST
•
For DVD SL (Single Layer)
Part No.
Description
J-6090-069-A
DISC (HLX-503), TEST (NTSC)
J-6090-088-A
DISC (HLX-504), TEST (NTSC)
J-2501-305-A
DISC (HLX-513), TEST (NTSC)
J-6090-077-A
DISC (HLX-506), TEST (PAL)
•
For DVD DL (Double Layer)
Part No.
Description
J-6090-071-A
DISC (HLX-501), TEST (NTSC)
J-6090-089-A
DISC (HLX-505), TEST (NTSC)
J-2501-306-A
DISC (HLX-514), TEST (NTSC)
J-6090-078-A
DISC (HLX-507), TEST (PAL)
RELEASING THE DISC TRAY LOCK
The disc tray lock function for the antitheft of sample disc in the
shop is equipped.
It can release the lock function in the following procedure.
The disc tray lock function for the antitheft of sample disc in the
shop is equipped.
It can release the lock function in the following procedure.
Releasing Procedure:
1. Press the [
1. Press the [
?/1
] button to turn the power on.
2. Press the [FUNCTION] button to turn the “DVD/CD” func-
tion.
3. Press two buttons of the [ENTER] and [VOCAL FADER] si-
multaneously for three seconds.
4. The message “UNLOCKED” is displayed on the fl uorescent
indicator tube and the disc tray is unlocked.
Note: When “LOCKED” is displayed on the fl uorescent indicator tube,
the disc tray lock is not released by turning the power on/off with
the [?/1] button.
the [?/1] button.
IF “PROTECT XX” (X is a number) APPEARS ON THE
FLUORESCENT INDICATOR TUBE
FLUORESCENT INDICATOR TUBE
Immediately unplug the AC
power cord, and check the
following items.
power cord, and check the
following items.
Ş
Is anything blocking the
ventilation openings of the
subwoofer?
ventilation openings of the
subwoofer?
Ş
Is the USB port short-circuited?
After you have checked these
above items and found no
problems, reconnect the AC
power cord, and turn on the
system. If the issue persists,
above items and found no
problems, reconnect the AC
power cord, and turn on the
system. If the issue persists,
HOW TO OPEN THE TRAY WHEN POWER SWITCH TURN OFF
Note 1: After the side panel and top panel are removed, this work is done.
Note 2: Please prepare the thin wire (clip etc. processed to the length of 8 cm or more).
Note 2: Please prepare the thin wire (clip etc. processed to the length of 8 cm or more).
1
Insert the clip etc. in the hole,
and push the lever in the direction
of the arrow.
of the arrow.
2
Pull out the tray in the
direction of the arrow.
DVD mechanism deck
–
Top view
–
–
Left view
–
hole
thin wire (clip etc. )
8 cm or more
hole
tray
Click on the first or last page to see other SA-WGT5D service manuals if exist.