Read Sony SA-WGT5D Service Manual online
SA-WGT5D
5
MODEL IDENTIFICATION
Distinguish by Part No. and destination code on the rear side of
the main unit.
Distinguish by Part No. and destination code on the rear side of
the main unit.
4-571-121-0
[]
CEL
4-583-695-0
[]
CEK
4-571-125-0
[]
EA3
– Rear view –
MODEL NUMBER LABEL
AEP model (CEL)
UK model (CEK)
EA model (EA3)
Other models
LA model (LA9)
E4 model (E4)
AR model (AR2)
AUS model (AU1)
RU model (RU1)
4-580-107-0
[]
4-580-107-1
[]
4-580-107-2
[]
4-580-107-3
[]
4-580-107-4
[]
4-580-107-5
[]
SP6 model (SP6)
IMPORTANT
DESTINATION SETTING
The destination information isn’t written in the ARAGON-MOTHER
board for the service.
Therefore, when the complete ARAGON-MOTHER board is re-
placed, be sure to perform the destination setting. (Important work)
The destination information isn’t written in the ARAGON-MOTHER
board for the service.
Therefore, when the complete ARAGON-MOTHER board is re-
placed, be sure to perform the destination setting. (Important work)
Note 1: The initial setting destination of t
he ARAGON-MOTHER
board for the service
is “LA”
. The message “D LATIN” is
displayed on the fl uorescent indicator tube.
Note 2: When distinguishing the destination of the product, refer to the
“MODEL IDENTIFICATION”
.
Note 3: If destination setting isn’t performed, it is possibility to occur the
defect to each operation of this unit.
Procedure:
1. Press two buttons of the [SOUND FIELD] and [S4 TUNING
1. Press two buttons of the [SOUND FIELD] and [S4 TUNING
+ >] simultaneously for more than ten seconds during the
demonstration mode.
demonstration mode.
2. It enters the destination setting mode, the message “D LATIN” is
displayed on the fl uorescent indicator tube.
Note
4: If the message “DEST LOCK” is displayed on the fl uores-
cent indicator tube, press the [ENTER] button to release from
this mode. Because the destination is locked, and it cannot
change the destination.
this mode. Because the destination is locked, and it cannot
change the destination.
Initial screen display
3. Press
the
[S2 +]/[S1 –
] buttons, destination is displayed
on the fl uorescent indicator tube in following order.
[S2 +]
[S2 +]
[S2 +]
[S2 +]
[S2 +]
[S2 +]
[S2 +]
[S2 +]
[S2 +]
[S2 +]
[S1 – ]
[S1 – ]
[S1 – ]
[S1 – ]
[S1 – ]
Screen display
[S1 – ]
[S1 – ]
[S1 – ]
[S1 – ]
[S1 – ]
[S1 – ]
[S1 – ]
[S1 – ]
[S1 – ]
[S1 – ]
Setting destination by display:
Screen
display
Destination
code
Model area
D SE ASIA
SP6
South East Asia (Except for India)
D INDIA
Not used
─
D ME AFC
E4, EA3
Middle East, Africa
D OCEANIA
AU1
Australia, New Zealand
D JAPAN
Not used
─
D BRAZIL
─
─
D N AME
Not used
─
D LATIN
LA9, AR2
Latin America (Except for Brazil),
Argentina
Argentina
D RUSSIA
RU1
Russia, Belarus, Kazakhstan
D EUROPE
CEL, CEK
Europe (Including UK, Ireland),
East Europe, Moldova
East Europe, Moldova
– Continued on next page –
Ver. 1.1
Click on the first or last page to see other SA-WGT5D service manuals if exist.