Read Sony PS-LX300H Service Manual online
– 4 –
TURNTABLE ASSEMBLY
SECTION 3
ELECTRICAL ADJUSTMENTS
SECTION 2
SERVICING NOTES
rubber mat
platter
Hook the belt on the motor pulley.
If the belt is removed from the platter, replace it with the
glossy side outward.
If the belt is removed from the platter, replace it with the
glossy side outward.
SETTING THE VOLTAGE SELECTOR
(E MODEL ONLY)
(E MODEL ONLY)
For customers of the model equipped with the voltage
selector
selector
Check to confirm that the voltage selector is set to the local power
line voltage. If not, set the voltage selector to the correct position
before connecting the AC power cord to a wall outlet.
line voltage. If not, set the voltage selector to the correct position
before connecting the AC power cord to a wall outlet.
Speed Adjustment
Note: Be sure to perform 45rpm adjustment before 33rpm.
1.
1.
Set the speed select button to 45.
Press the START/STOP button.
Adjust VR101 so that the striped pattern is stationary.
Press the START/STOP button.
Adjust VR101 so that the striped pattern is stationary.
2.
Set the speed select button to 33.
Adjust VR102 in the same way.
Adjust VR102 in the same way.
VR102
(33rpm)
(33rpm)
VR101
(45rpm)
(45rpm)
SPEED
ADJUST
ADJUST
33
+
+
45
+
+
–
–
.
FRONT SIDE
n
n
110
V 220V
Click on the first or last page to see other PS-LX300H service manuals if exist.