Read Sony PMC-R35L Service Manual online
– 4 –
SECTION 2
GENERAL
This section is extracted
from instruction manual.
from instruction manual.
Basic Operations
4
GB
Playing a CD
Basic Operations
For hookup instructions, see pages 25 - 26.
1
Press ZPUSH OPEN/CLOSE
down to open the CD
compartment and place the CD
on the CD compartment.
down to open the CD
compartment and place the CD
on the CD compartment.
2
Close the lid of the CD
compartment.
compartment.
3
Press u (N on the remote)
(direct power-on).
(direct power-on).
The player plays all the tracks
once.
once.
Display
With the label side up
1,2
3
Playing time
Track number
PUSH
OPEN/CLOSE
Z
PUSH
OPEN/CLOSE
Z
NX
Basic Operations
Basic Operations
5
GB
Use these buttons for additional operations
Z
PUSH OPEN/CLOSE
VOLUME +, –
u
x
To
Press
adjust the volume
VOLUME +, – (VOL +, –
on the remote)
on the remote)
stop playback
x
pause playback
u
(X on the remote)
Press the button again to
resume play after pause.
resume play after pause.
go to the next track
AMS/SEARCH >
go back to the previous track
AMS/SEARCH .
remove the CD
Z
PUSH OPEN/CLOSE
turn on/off the player
OPERATE
Tip
Next time you want to
listen to a CD, just press
u
listen to a CD, just press
u
. The player turns on
automatically and starts
playing the CD.
playing the CD.
OPERATE
AMS/SEARCH ., >
Basic Operations
6
GB
Listening to the radio
For hookup instructions, see pages 25 - 26.
1
Press BAND until the band you
want appears in the display
(direct power-on).
want appears in the display
(direct power-on).
2
Hold down TUNING•TIME SET
+ or – (TUNE + or – on the
remote) until the frequency digits
begin to change in the display.
+ or – (TUNE + or – on the
remote) until the frequency digits
begin to change in the display.
The player automatically scans
the radio frequencies and stops
when it finds a clear station.
the radio frequencies and stops
when it finds a clear station.
If you can't tune in a station,
press the button repeatedly to
change the frequency step by
step.
press the button repeatedly to
change the frequency step by
step.
When you tune in an FM station
that provides RDS (Radio Data
System) services, the name of the
station appears in the display and
“R•D•S” indicator lights up.
that provides RDS (Radio Data
System) services, the name of the
station appears in the display and
“R•D•S” indicator lights up.
Display
Indicates an FM stereo
broadcast.
broadcast.
1
2
BAND
TUNING
TIME SET
Display
Basic Operations
Basic Operations
7
GB
Use these buttons for additional operations
VOLUME + , –
PLAY MODE
MONO/ST ISS
MONO/ST ISS
To
Press
adjust the volume
VOLUME +, – (VOL +, – on
the remote)
the remote)
turn on/off the radio
OPERATE
To improve broadcast reception
FM
Keep the FM lead aerial (supplied) as horizontal as
possible (see page 26).
FM
Keep the FM lead aerial (supplied) as horizontal as
possible (see page 26).
MW/LW
Keep the MW/LW loop aerial (supplied) away as far
as possible from the player and then reorient the
aerial (see page 26).
Keep the MW/LW loop aerial (supplied) away as far
as possible from the player and then reorient the
aerial (see page 26).
Tips
• If the FM broadcast is
• If the FM broadcast is
noisy, press PLAY
MODE•MONO/ST ISS
until “MONO” appears
in the display and the
radio will play in
monaural.
MODE•MONO/ST ISS
until “MONO” appears
in the display and the
radio will play in
monaural.
• Next time you want to
listen to the radio, just
press BAND. The player
turns on automatically
and starts playing the
previous station.
press BAND. The player
turns on automatically
and starts playing the
previous station.
• RDS is available only on
FM stations.
• To display the
frequency when the
station name is shown
in the display, press
DSPL ENT MEM to
make “PS” disappears
from the display.
station name is shown
in the display, press
DSPL ENT MEM to
make “PS” disappears
from the display.
• If the reception of RDS
is weak or has poor
quality, “R•D•S”
indicator will go off.
quality, “R•D•S”
indicator will go off.
OPERATE
Click on the first or last page to see other PMC-R35L service manuals if exist.