Read Sony PMC-DR45 Service Manual online
– 18 –
FM FREQUENCY COVERAGE
ADJUSTMENT
Frequency Display
87.5 MHz
108 MHz
Reading on Digital voltmeter
1.5 ± 0.1 V
3.8 ± 0.4 V
Adjustment Part
L2
<confirmation>
FM TRACKING ADJUSTMENT
Adjust for a maximum reading on level meter.
L1
CT1
87.5 MHz
108 MHz
FM IF ADJUSTMENT
Adjust for a maximum reading on level meter.
T2
10.7 MHz (Display: 98 MHz)
AM FREQUENCY COVERAGE
ADJUSTMENT
Frequency Display
530 kHz
1,710 kHz
Reading on Digital voltmeter
0.9 ± 0.1 V
5.1 ± 0.4 V
Adjustment Part
T4
<confirmation>
AM TRACKING ADJUSTMENT
Adjust for a maximum reading on level meter.
T3
CT3
620 kHz
1,400 kHz
AM IF ADJUSTMENT
Adjust for a maximum reading on level meter.
T1
450 kHz (Display: 1,000 kHz)
Adjustment Location: TUNER board (See page 19.)
5-2. TUNER SECTION 0 dB = 1 µV
• FM Section
Setting:
BAND button: FM
BAND button: FM
75 kHz frequency
deviation by 1 kHz signal
output level : as low as possible
deviation by 1 kHz signal
output level : as low as possible
• AM Section
Setting:
BAND button: AM
BAND button: AM
30% amplitude
modulation by 400 Hz signal
output level : as low as possible
modulation by 400 Hz signal
output level : as low as possible
• Connecting Level Meter (FM and AM)
FM terminal
(J1)
(J1)
FM RF signal
generator
generator
0.01
µ
F
set
Put the lead-wire
antenna close to
the AM loop
antenna.
antenna close to
the AM loop
antenna.
AM RF signal
generator
generator
i
(headphones) jack (J301)
set
32
Ω
level meter
(range: 0.5-5 V ac)
(range: 0.5-5 V ac)
digital
voltmeter
voltmeter
tuner board
TP (VT)
TP (VT)
• Connecting Digital Voltmeter (FM and AM)
• Repeat the procedures in each adjustment several times, and the
frequency coverage and tracking adjustments should be finally
done by the trimmer capacitors.
done by the trimmer capacitors.
Click on the first or last page to see other PMC-DR45 service manuals if exist.