Read Sony PHA-1A / PHA-1AEU Service Manual online
SERVICE MANUAL
Sony Corporation
Published by Sony Techno Create Corporation
PHA-1A/1AEU
SPECIFICATIONS
9-896-144-02
2015H33-1
©
2015.08
US Model
Canadian Model
E Model
Australian Model
Chinese Model
Russian Model
PHA-1A
AEP Model
UK Model
PHA-1AEU
Ver. 1.1 2015.08
Frequency range
10 Hz – 100 kHz
Supported impedance
8
ȍ - 600 ȍ
Maximum output*
1
(when using the built-in lithium-ion
rechargeable battery)
Approx. 148 mW + 148 mW (8
ȍ, 10% distortion)
Approx. 80 mW + 80 mW (32
ȍ, 1% distortion)
Approx. 16.4 mW + 16.4 mW (300
ȍ, 10% distortion)
Output jack
Stereo mini jack*
2
( (headphones))
*
2
Only a 3-pole stereo mini plug is supported. Other plugs, including 2-pole
mini plug or 4-pole stereo mini plug, are not supported.
Input jack/port
Computer/WALKMAN®/Xperia connecting port
iPhone/iPad/iPod connecting port
iPhone/iPad/iPod connecting port
Operating temperature
0 °C to 40 °C (32°F to 104°F)
Charging temperature
5 °C to 35 °C (41°F to 95°F)
Power source
DC 3.7 V: built-in lithium-ion rechargeable battery
Rated power consumption
(AEP, Russian, UK, E, Australian and Chinese models)
(AEP, Russian, UK, E, Australian and Chinese models)
7 W
DC 5 V: when charging via USB
Battery life
Approx. 6 hours*
3
*
3
when using the unit at 1 mW + 1 mW output (24
ȍ). Time may vary,
depending on the immediate environment or conditions of use.
Charging time
When connected to a computer: Approx. 3.5 hours*
4
When connected to an AC outlet using the recommended USB AC adaptor
(sold separately): Approx. 2 hours*
(sold separately): Approx. 2 hours*
3
*
4
Time required for empty battery to recharge while the unit is off.
Dimensions
Approx. 62 mm × 18.5 mm × 109 mm
Mass
Approx. 145 g (5.11 oz)
Supported sampling frequencies/bit
Maximum 192 kHz/24 bit
Included items
Digital cable for WALKMAN® (1)
Digital cable for Xperia (1)
Micro-USB cable (1)
Silicone belt (2)
Protection sheet (1)
Startup Guide (1)
Reference Guide (1)
Digital cable for Xperia (1)
Micro-USB cable (1)
Silicone belt (2)
Protection sheet (1)
Startup Guide (1)
Reference Guide (1)
Remove the included items other than the unit by opening the tray under the
unit and removing them.
unit and removing them.
Operating environment
Compliant OS:
Windows 8.1/Windows 8.1 Pro/Windows 8/Windows 8 Pro
Windows 7
Windows 8.1/Windows 8.1 Pro/Windows 8/Windows 8 Pro
Windows 7
Starter (SP1 or later)/Home Basic (SP1 or later)/Home Premium (SP1 or later)/
Professional (SP1 or later)/Ultimate (SP1 or later)
Windows Vista
Home Basic (SP2 or later)/Home Premium (SP2 or later)/Business (SP2 or
later)/Ultimate (SP2 or later)
Professional (SP1 or later)/Ultimate (SP1 or later)
Windows Vista
Home Basic (SP2 or later)/Home Premium (SP2 or later)/Business (SP2 or
later)/Ultimate (SP2 or later)
Mac OS X (v10.6.8 or later)
CPU: Intel Core 2 Processor 1.6 GHz or better
Memory: 1 GB or better
USB port (USB 2.0 High Speed)
CPU: Intel Core 2 Processor 1.6 GHz or better
Memory: 1 GB or better
USB port (USB 2.0 High Speed)
One of the above OS need to be installed to the computer at the factory.
The unit is not guaranteed to operate with all computers.
The unit is not guaranteed to operate with home built computers, operating
systems that are personally upgraded, or multiple operating systems.
The unit is not guaranteed to operate with functions such as standby, sleep,
or hibernation, on any computer.
The unit is not guaranteed to operate with all computers.
The unit is not guaranteed to operate with home built computers, operating
systems that are personally upgraded, or multiple operating systems.
The unit is not guaranteed to operate with functions such as standby, sleep,
or hibernation, on any computer.
Design and specifications are subject to change without notice.
(2
1
/
2
×
3
/
4
× 4
3
/
8
in) (w/h/d, projecting parts are not included)
*
1
When the GAIN select switch is set to “LOW”, the maximum output will be
approx. 150 mV + 150 mV. (PHA-1AEU only)
PORTABLE HEADPHONE AMPLIFIER
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Photo: PHA-1A
PHA-1A/1AEU
2
Compatible iPhone/iPad/iPod models
You can use the unit with only the following models. Update
your iPhone, iPad or iPod to the latest software before use.
your iPhone, iPad or iPod to the latest software before use.
iPhone 6 Plus
iPhone 6
iPhone 5s
iPhone 5c
iPhone 5
iPhone 4s
iPhone 4
iPhone 3GS
iPhone 3G
iPhone
iPhone 6
iPhone 5s
iPhone 5c
iPhone 5
iPhone 4s
iPhone 4
iPhone 3GS
iPhone 3G
iPhone
iP
ad Air 2
iP
ad mini 3
iP
ad Air
iP
ad mini 2
iP
ad mini
iP
ad (4th generation)
iP
ad (3rd generation)
iP
ad 2
iP
ad
iP
od touch (1st through 5th
generation)
iP
od classic 120GB/160GB
(2009)
iP
od nano (2nd through 7th
generation)
(As of December 2014)
This unit is compatible only with the audio playback functions
iPhones/iPads/iPods.
Depending on the Apple product, there may be significant
electric power required when starting the communication
connected with the unit. The battery power of the unit may be
drained and the unit may turn off if you connect the Apple
product to the unit when the battery power is low. In this case,
charge the unit or use the USB AC adaptor to connect with the
Apple product.
iPhones/iPads/iPods.
Depending on the Apple product, there may be significant
electric power required when starting the communication
connected with the unit. The battery power of the unit may be
drained and the unit may turn off if you connect the Apple
product to the unit when the battery power is low. In this case,
charge the unit or use the USB AC adaptor to connect with the
Apple product.
Trademark Notices
WALKMAN® and WALKMAN® logo are registered trademarks of Sony
Corporation.
“Xperia” and “Xperia Tablet” are trademarks of Sony Mobile
Communications AB.
iPad, iPhone, iPod, iPod classic, iPod nano, iPod touch, and Retina are
trademarks of Apple Inc., registered in the U.S. and other countries. iPad Air,
and iPad mini are trademarks of Apple Inc.
“Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an
electronic accessory has been designed to connect specifically to iPod,
iPhone or iPad, respectively, and has been certified by the developer to
meet Apple performance standards. Apple is not responsible for the
operation of this device or its compliance with safety and regulatory
standards. Please note that the use of this accessory with iPod, iPhone, or
iPad may affect wireless performance.
Macintosh and Mac OS are trademarks of Apple Inc., registered in the U.S.
and other countries.
Microsoft, Windows and Windows Vista are registered trademarks or
trademarks of Microsoft Corporation in the United States and/or other
countries.
All other trademarks and registered trademarks are trademarks or
registered trademarks of their respective holders. In this manual, TM and ®
marks are not specified.
Corporation.
“Xperia” and “Xperia Tablet” are trademarks of Sony Mobile
Communications AB.
iPad, iPhone, iPod, iPod classic, iPod nano, iPod touch, and Retina are
trademarks of Apple Inc., registered in the U.S. and other countries. iPad Air,
and iPad mini are trademarks of Apple Inc.
“Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an
electronic accessory has been designed to connect specifically to iPod,
iPhone or iPad, respectively, and has been certified by the developer to
meet Apple performance standards. Apple is not responsible for the
operation of this device or its compliance with safety and regulatory
standards. Please note that the use of this accessory with iPod, iPhone, or
iPad may affect wireless performance.
Macintosh and Mac OS are trademarks of Apple Inc., registered in the U.S.
and other countries.
Microsoft, Windows and Windows Vista are registered trademarks or
trademarks of Microsoft Corporation in the United States and/or other
countries.
All other trademarks and registered trademarks are trademarks or
registered trademarks of their respective holders. In this manual, TM and ®
marks are not specified.
SAFETY-RELATED COMPONENT WARNING!
COMPONENTS IDENTIFIED BY MARK
0 OR DOTTED LINE
WITH MARK
0 ON THE SCHEMATIC DIAGRAMS AND IN
THE PARTS LIST ARE CRITICAL TO SAFE OPERATION.
REPLACE THESE COMPONENTS WITH SONY PARTS
REPLACE THESE COMPONENTS WITH SONY PARTS
WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS
MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE
0 SUR
LES DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES
PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE FONC-
TIONNEMENT. NE REMPLACER CES COMPOSANTS QUE
PAR DES PIÈCES SONY DONT LES NUMÉROS SONT DON-
NÉS DANS CE MANUEL OU DANS LES SUPPLÉMENTS
PUBLIÉS PAR SONY.
PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE FONC-
TIONNEMENT. NE REMPLACER CES COMPOSANTS QUE
PAR DES PIÈCES SONY DONT LES NUMÉROS SONT DON-
NÉS DANS CE MANUEL OU DANS LES SUPPLÉMENTS
PUBLIÉS PAR SONY.
1.
SERVICING NOTES
.............................................
3
2. DISASSEMBLY
2-1. Disassembly
Flow
........................................................... 4
2-2. Bottom
Panel
................................................................... 4
2-3. Case Block, MAIN Board Block .................................... 5
2-4. Battery
2-4. Battery
Assy
(BAT1)
....................................................... 5
2-5. MAIN
Board
................................................................... 6
2-6. Plate
Middle
Assy
........................................................... 7
2-7. HP JACK Board .............................................................. 7
3. DIAGRAMS
3-1. Block
Diagram
................................................................ 9
3-2. Printed Wiring Boards (PHA-1A) ................................... 11
3-3. Schematic
3-3. Schematic
Diagram
- MAIN Section (1/4) (PHA-1A) - ................................. 12
3-4. Schematic
Diagram
- MAIN Section (2/4) (PHA-1A) - ................................. 13
3-5. Schematic
Diagram
- MAIN Section (3/4) (PHA-1A) - ................................. 14
3-6. Schematic
Diagram
- MAIN Section (4/4) (PHA-1A) - ................................. 15
4.
EXPLODED VIEWS
4-1. MAIN Board Section ...................................................... 23
4-2. Battery
4-2. Battery
Section
................................................................ 24
5.
ELECTRICAL PARTS LIST
.............................. 25
Accessories are given in the last of the electrical parts list.
TABLE OF CONTENTS
Note: Refer to service manual supplement-1 for printed wiring board,
schematic diagram and electrical parts list of PHA-1AEU.
Ver. 1.1
PHA-1A/1AEU
3
SECTION 1
SERVICING NOTES
UNLEADED SOLDER
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size)
: LEAD FREE MARK
Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40 °C higher
• Unleaded solder melts at a temperature about 40 °C higher
than ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350 °C.
Caution: The printed pattern (copper foil) may peel away if
about 350 °C.
Caution: The printed pattern (copper foil) may peel away if
the heated tip is applied for too long, so be careful!
• Strong
viscosity
Unleaded solder is more viscous (sticky, less prone to fl ow)
than ordinary solder so use caution not to let solder bridges
occur such as on IC pins, etc.
than ordinary solder so use caution not to let solder bridges
occur such as on IC pins, etc.
•
Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
also be added to ordinary solder.
The SERVICING NOTES contains important information for servicing. Be sure to read this section before repairing the unit.
DESTINATION ABBREVIATIONS
The following abbreviations for model destinations are used in this
service manual.
The following abbreviations for model destinations are used in this
service manual.
• Abbreviations
AUS :
AUS :
Australian
model
CH
: Chinese model
CND : Canadian model
LA
LA
: Latin American model
RU
: Russian model
NOTE FOR PARTS REPAIR OF HP JACK AND VOLUME
BOARDS
When HP JACK and VOLUME boards installed in this unit are
defective, replace the complete mounted board or the whole parts
including the complete mounted board. The mounted parts on the
HP HACK and VOLUME boards cannot replace with single.
BOARDS
When HP JACK and VOLUME boards installed in this unit are
defective, replace the complete mounted board or the whole parts
including the complete mounted board. The mounted parts on the
HP HACK and VOLUME boards cannot replace with single.
NOTE FOR REPLACING THE MAIN BOARD OR CASE
When replacing the MAIN board or case, be sure to replace both
parts simultaneously. Among the repair parts, the MAIN board and
case are supplied as one unit.
When replacing the MAIN board or case, be sure to replace both
parts simultaneously. Among the repair parts, the MAIN board and
case are supplied as one unit.
NOTE FOR REPLACING THE ELECTRICAL PARTS
ON THE MAIN BOARD
The following parts on the MAIN board cannot replace with sin-
gle. When these parts are damaged, replace the complete mounted
board. (Q003, Q004: PHA-1AEU only)
ON THE MAIN BOARD
The following parts on the MAIN board cannot replace with sin-
gle. When these parts are damaged, replace the complete mounted
board. (Q003, Q004: PHA-1AEU only)
IC001, IC002, IC003, IC101, IC201, IC301, IC401, IC403, IC500,
IC501, IC502, IC503, IC505, IC506, IC507, IC601, IC602, IC701,
IC702, Q001, Q002, Q003, Q004
IC501, IC502, IC503, IC505, IC506, IC507, IC601, IC602, IC701,
IC702, Q001, Q002, Q003, Q004
NOTE OF REPLACING THE IC704 ON THE MAIN
BOARD
Replacement of IC704 on the MAIN board used in this unit re-
quires a special tool.
BOARD
Replacement of IC704 on the MAIN board used in this unit re-
quires a special tool.
Ver. 1.1
PHA-1A/1AEU
4
SECTION 2
DISASSEMBLY
•
This set can be disassembled in the order shown below.
2-1. DISASSEMBLY FLOW
Note: Follow the disassembly procedure in the numerical order given.
2-2. BOTTOM PANEL
SET
2-3. CASE BLOCK, MAIN BOARD BLOCK
(Page
(Page
5)
2-7. HP JACK BOARD
(Page
(Page
7)
2-4. BATTERY
ASSY
(BAT1)
(Page
5)
2-5. MAIN
BOARD
(Page
6)
2-6. PLATE
MIDDLE
ASSY
(Page
7)
2-2. BOTTOM
PANEL
(Page
4)
1 two screws
(M1.4
u 4)
2 bottom panel