Read Sony NWZ-F885 / NWZ-F886 / NWZ-F887 Service Manual online
NWZ-F885/F886/F887
4
SECTION 1
SERVICING NOTES
ABOUT THE REPAIRING OF BOARD
When the boards installed in this unit are defective, exchange the
complete mounted board.
However the [
When the boards installed in this unit are defective, exchange the
complete mounted board.
However the [
1
] (S7004), [VOL +] (S7001), [VOL −] (S7003),
[
>
] (S7006), [
u
] (S7002) and [
.
] (S7007) switches on the
MAIN board are exchangeable.
Refer to “4. EXPLODED VIEWS” (page 32).
Refer to “4. EXPLODED VIEWS” (page 32).
ABOUT THE HANDLING OF THE BATTERY ASSY
(BAT1)
(BAT1)
It cannot reuse, when the BATTERY ASSY (BAT1) is removed from adhe-
sive sheet. Replace it with a new BATTERY ASSY (BAT1).
And when the BATTERY ASSY (BAT1) is removed from board, insulate
the end of wire by a tape etc. to prevent short-circuited of the wire part of
BATTERY ASSY (BAT1).
sive sheet. Replace it with a new BATTERY ASSY (BAT1).
And when the BATTERY ASSY (BAT1) is removed from board, insulate
the end of wire by a tape etc. to prevent short-circuited of the wire part of
BATTERY ASSY (BAT1).
battery assy (BAT1)
wire
Wrap by the tape etc. and
insulate the end of wire.
insulate the end of wire.
ABOUT THE REPAIRING OF THE BATTERY ASSY
(BAT1)
When the BATTERY ASSY (BAT1) is replaced, refer to “3. SER-
VICE MODE” (page 21 to 31).
(BAT1)
When the BATTERY ASSY (BAT1) is replaced, refer to “3. SER-
VICE MODE” (page 21 to 31).
NOTE THE MAIN BOARD REPLACING
When the MAIN board is replaced, you must perform the destina-
tion setting. Refer to “DESTINATION SETTING” (page 5), and
perform the destination setting.
Moreover, when the MAIN board is replaced, the MAC address and
DTCP-IP ID have been changed.
Print the page 9 and 11, and pass it to the customer with the re-
paired unit when you return the customer the repaired unit.
When the MAIN board is replaced, you must perform the destina-
tion setting. Refer to “DESTINATION SETTING” (page 5), and
perform the destination setting.
Moreover, when the MAIN board is replaced, the MAC address and
DTCP-IP ID have been changed.
Print the page 9 and 11, and pass it to the customer with the re-
paired unit when you return the customer the repaired unit.
Initializing
Resetting
Delete data such as Google account information and downloaded applications, and
reset your Walkman to factory default.
reset your Walkman to factory default.
Note
If you put a checkmark in the checkbox by tapping [Erase USB storage], the following data
will be erased: Music and photo data transferred to your Walkman, Preinstalled content, the
Setup.exe file stored in Walkman memory for installation on your computer. Be careful
because the preinstalled content and the files in the “FOR_WINDOWS” and “FOR_MAC”
folders will not be offered again. It is best to back up such data to a computer before
initializing the Walkman.
will be erased: Music and photo data transferred to your Walkman, Preinstalled content, the
Setup.exe file stored in Walkman memory for installation on your computer. Be careful
because the preinstalled content and the files in the “FOR_WINDOWS” and “FOR_MAC”
folders will not be offered again. It is best to back up such data to a computer before
initializing the Walkman.
Tap
-
[Settings] - [
Backup & reset] - [Factory data reset] - [Reset
device].
1.
To delete transferred music or photos, tap [Erase USB storage] to put a
checkmark in the checkbox.
checkmark in the checkbox.
Tap [Erase everything].
2.
Your Walkman restarts automatically after being initialized.
Try resetting your Walkman if operations become unstable.
Before resetting your Walkman, check that no song, video, etc. is being played back,
otherwise the data may be damaged.
Before resetting your Walkman, check that no song, video, etc. is being played back,
otherwise the data may be damaged.
Press and hold the button for about 8 seconds or press the RESET button with
a pen or paper clip, etc. to reset your Walkman.
a pen or paper clip, etc. to reset your Walkman.
1.
Note
No data or settings will be deleted by resetting your Walkman.
Data and settings in use may not be saved when you reset your Walkman.
Click on the first or last page to see other NWZ-F885 / NWZ-F886 / NWZ-F887 service manuals if exist.