NW-S603, NW-S605, NW-S703F, NW-S705F, NW-S706F (serv.man2) - Sony Audio Service Manual (repair manual). Page 2

Read Sony NW-S603 / NW-S605 / NW-S703F / NW-S705F / NW-S706F (serv.man2) Service Manual online

NW-S603/S605/S703F/S705F/S706F
1
2.
DIAGRAMS
Note for Printed Wiring Boards and Schematic Diagrams
MAIN board is multi-layer printed board.
However, the patterns of intermediate-layers have not been
included in diagrams.
Lead Layouts
Note on Schematic Diagram:
All capacitors are in 
μ
F unless otherwise noted. (p: pF)
50 WV or less are not indicated except for electrolytics
and tantalums.
All resistors are in 
Ω
and
1
/
4
W or less unless otherwise
specified.
• A
: B+ Line.
Power voltage is dc 3.7 V and fed with regulated dc power
supply from CN601 pin 
1
and pin 
2
on the MAIN board.
Voltages are dc with respect to ground under no-signal
conditions.
no mark : PLAY BACK
Voltages are taken with a VOM (Input impedance 10 M
Ω
).
Voltage variations may be noted due to normal produc-
tion tolerances.
Signal path.
F
: AUDIO
Note on Printed Wiring Board:
: Pattern from the side which enables seeing.
(The other layers' patterns are not indicated.)
Caution:
Pattern face side:
Parts on the pattern face side seen from
(Side B)
the pattern face are indicated.
Parts face side:
Parts on the parts face side seen from
(Side A)
the parts face are indicated.
 *
Replacement of IC201, IC2701, IC3005 and IC3007 on
the MAIN board used in this set requires a special tool.
Lead layout of conventional IC
CSP (chip size package)
surface
• The voltage and waveform of CSP (chip size package)
cannot be measured, because its lead layout is different
form that of conventional IC.
 *
Replacement of IC201, IC2701, IC3005 and IC3007 on
the MAIN board used in this set requires a special tool.
Page of 16
Display

Click on the first or last page to see other NW-S603 / NW-S605 / NW-S703F / NW-S705F / NW-S706F (serv.man2) service manuals if exist.