NW-MS11 - Sony Audio Service Manual (repair manual). Page 3

3

In case of replacing the EEPROM (IC6002) when repairing this
set, it is necessary to write the setting for destination.
When replacing the EEPROM (IC6002), write the setting for
destination, referring to “4. TEST MODE, Items to Check in
the Test Mode, 3-2. Writing Destination”.

• Replacement of MBM29LV400BC-90PBT (IC5000),

uPD442002FQ-BB70X-BC1 (IC5600), CXD9534BGG
(IC7001) and CXD1859GA (IC8000) used in this set requires a
special tool.

• To check the operation when the MAIN board and SUB board

are removed, check it after connecting CN100 on the MAIN
board and CN200 on the SUB board with the servicing jig (relay
board between the MAIN board and SUB board) as shown below.

MAIN board

console unit

SUB board

servicing jig
(MAIN/SUB relay board)

• IBM PC/AT or Compatible

CPU:  MMX™ Pentium

®

 233 MHz or higher

Hard disk drive space: 60 MB or more
RAM: 64 MB or higher
CD-ROM drive
Sound Board
USB port

• Operating System: Windows

®

 98/Windows

®

 98 Second Edition/Windows

®

 2000 Professional/Windows

®

 Me/Windows XP Home Edition/

The following 

– Other versions of Windows

®

 95, Windows

®

 NT, Windows 2000 

– Upgraded from Windows

®

 3.1/95 to Windows

®

 98 (or Windows

®

 98 

Windows

®

Me)  or from Windows

® 

Me/Windows

®

 2000 

– Dual boot with Windows

®

 2000 (or Windows XP) and Windows

®

 98 (or Windows

®

 98 Second Edition/Windows

®

Me)

• Display: High (16bit) Color or more (800 

×

 480 dot or more)

• Internet access: for Web registration and EMD services

We do not assure trouble-free operation for all computers satisfying the system 

For the protection of copyrights when you use the computer with an optical 

digital output connector, it may be disabled during playback with this software.

OpenMG Jukebox software users with Windows 2000/Windows XP 
models should be aware of the following:

•  Only Administrators are allowed to install and uninstall the OpenMG 

•  To use the application, log on with the user name of “Administrator” or 

•  Do not remove or insert the CD-ROM drive connected via a PC card 

while OpenMG Jukebox is running.

•

 

 Only Windows 2000 Professional is supported. If you use Windows XP, 

both Professional Edition and Home Edition are supported.

•  Only manufacturer installed NTFS format is supported.

If Windows XP or Windows Millennium Edition is installed in your 
computer, and you perform the “System Restore” function of the 
Windows “System Tools,” the songs managed by OpenMG Jukebox may 

Therefore, before executing “System Restore,” back up the songs using 
OpenMG Jukebox Backup Tool first.
Then, after the “System Restore” function is finished, restore the songs 
using OpenMG Jukebox Backup Tool to ensure the integrity and 

For more information about backup, refer to the online Help for OpenMG 

When songs become unplayable by executing “System Restore,” an error dialog box 
may be displayed. In this case, follow the displayed messages.

Windows XP Professional(manufacturer installed)
environments are not supported.

(e.g., Server, etc.)

Second Edition/

Professional to Windows XP.

requirements.

Jukebox software.

“Power User”.

become corrupted and rendered unplayable.

reliability of song playback.

Jukebox.