NW-HD3 - Sony Audio Service Manual (repair manual). Page 3

Read Sony NW-HD3 Service Manual online

3
NW-HD3
SECTION  1
SERVICING  NOTES
UNLEADED SOLDER
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size)
: LEAD FREE MARK
Unleaded solder has the following characteristics.
Unleaded solder melts at a temperature about 40 ˚C higher
than ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350 ˚C.
Caution: The printed pattern (copper foil) may peel away if
the heated tip is applied for too long, so be careful!
Strong viscosity
Unleaded solder is more viscous (sticky, less prone to flow)
than ordinary solder so use caution not to let solder bridges
occur such as on IC pins, etc.
Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
Replacement of CXR704060-201GA (IC1003),
S1R72003BOOA100 (IC2001), CXR710160-211GH
(IC3001), CXD1616GH (IC7001), EDL1216CASA-10L-E
(IC7002) and SC901584EPR2 (IC9002) used in this set
requires a special tool.
When IC1101 and IC1102 (IC1102 is mounted only E, Hong
Kong, Taiwan, Korean, Chinese and Tourist models) are
damaged, exchange the new MAIN board for the MAIN board
which IC damaged.
System requirements
Computer
IBM PC/AT or Compatible
CPU: Pentium II 400 MHz or higher (Pentium 
III
 450 MHz or higher is 
recommended.)
Hard disk drive space: 200 MB or more (1.5 GB or more is recommended.) (The 
amount of space will vary according to the Windows version and the number of 
music files stored on the hard disk.) 
RAM: 64 MB or more (128 MB or more is recommended.)
Others
CD drive (capable of digital playback by WDM)
  Sound Board
USB port (Hi-Speed USB is supported.)
Operating System
Factory installed:
Windows XP Media Center Edition 2005/Windows XP Media Center Edition 2004/
Windows XP Media Center Edition/Windows XP Professional/
Windows XP Home Edition/Windows 2000 Professional/
Windows Millennium Edition/Windows 98 Second Edition
Display
High Color (16 bit) or higher, 800 
×
 600 dots or better (1024 
×
 768 dots or better is 
recommended.)
Others
Internet access: for Web registration, EMD services and CDDB
Windows Media Player (version 7.0 or higher) installed for playing WMA files
Notes
  SonicStage is not supported by the following environments:
– Operating systems other than those the indicated above
– Personally constructed PCs or operating systems
– An environment that is an upgrade of the original manufacturer-installed operating system
– Multi-boot environment
– Multi-monitor environment
– Macintosh
We do not guarantee trouble-free operation on all computers that satisfy the system requirement.
The NTFS format of Windows XP/Windows 2000 Professional can be used only with the standard (factory) 
settings.
For Windows 2000 Professional users, install Service Pack 3 or later version before using the software.
We do not guarantee trouble-free operation of the system suspend, sleep, or hibernation function on the 
computers.
Ver. 1.3
Page of 52
Display

Click on the first or last page to see other NW-HD3 service manuals if exist.