Read Sony NW-HD1 Service Manual online
9
NW-HD1
SECTION 4
TEST MODE
1. OUTLINE
For the LCD display, the LCD on the main unit is shown, but the
contents of LCD display on the remote commander are same.
Operation in the test mode is performed with the main unit. A key
having no particular description in the text, indicates a main unit key.
contents of LCD display on the remote commander are same.
Operation in the test mode is performed with the main unit. A key
having no particular description in the text, indicates a main unit key.
Power supply voltage : 3.65 to 3.75 V
Volume
Volume
: 24
SOUND EQ
: OFF
AVLS
: OFF
[HOLD] switch
: OFF
Set states
: horizontal states
2. SETTING THE TEST MODE
1. Supply power to the set.
2. Switch-on the [HOLD] switch on the main unit.
3. Operate as follows.
2. Switch-on the [HOLD] switch on the main unit.
3. Operate as follows.
•
When use only main unit
While pressing the [MODE] key on the main unit, press the key on
the main unit as following order.
the main unit as following order.
>
→
>
→
.
→
.
→
>
→
.
→
>
→
.
→
M
→
m
•
When use the main unit and remote commander
While pressing the [MODE] key on the main unit, press the key on
the remote commander as following order.
the remote commander as following order.
>
→
>
→
.
→
.
→
>
→
.
→
>
→
.
→
+
→
–
4. Switch-off the [HOLD] switch on the main unit and enter the
test mode.
3. RELEASING THE TEST MODE
Press the [SET UP] key on the main unit or
x
key on the remote
commander for 1.5 seconds or more, turn off the power and release
the test mode.
the test mode.
4. CONFIGURATION OF THE TEST MODE
Flow of the test mode:
5. OPERATION OF THE TEST MODE
5-1. Power
5-1-1. Power supply voltage check
5-1. Power
5-1-1. Power supply voltage check
This mode is used in case power supply voltage in the state where
all power supply lines (1.2 V/1.5 V/1.8 V/2.0 V/2.4 V/3.3 V/VSTBY/
VDC) are starting is checked.
Checking method:
all power supply lines (1.2 V/1.5 V/1.8 V/2.0 V/2.4 V/3.3 V/VSTBY/
VDC) are starting is checked.
Checking method:
1. Enter the test mode.
2. Press the
2. Press the
,
key to display major item, and press the
M m
key to select the “POWER”.
3. Press the
,
key to display minor item, and press the
M m
key to select the “V CHK”.
4. Press the
Bx
key, “START” is displayed and all power supply
lines are started.
5. Press the [MODE] key, “HD OFF/ON” is displayed. Each time
[MODE] key is pressed, hard disk drive power supply ON/OFF
switch is performed.
switch is performed.
6. Press the [SET UP] key, return to minor item selection screen.
5-1-2. Consumption current (read state) check
This mode is used in case consumption current (read state) in the
state where the hard disk drive has booted is checked.
Checking method:
state where the hard disk drive has booted is checked.
Checking method:
1. Enter the test mode.
2. Press the
2. Press the
,
key to display major item, and press the
M m
key to select the “POWER”.
3. Press the
,
key to display minor item, and press the
M m
key to select the “A RD”.
4. Press the
Bx
key, “READY?” is displayed. In this state, Each
time [MODE] key is pressed, EL back light ON/OFF switch is
performed.
performed.
<
key
,
key
Bx
key
F/W version display
Major item
<
M m
M m
key
,
key
Major item switching: key
Minor item switching: key
[SET UP]
key
Minor item
Finish
or
Result
Start
Automatic
V CHK
LCD display
START
LCD display
HD OFF/ON
LCD display
POWER
LCD display
A RD
LCD display
READY?
LCD display
POWER
LCD display
Ver 1.1
Click on the first or last page to see other NW-HD1 service manuals if exist.