NW-A805, NW-A806, NW-A808, NWZ-A815, NWZ-A816, NWZ-A818 - Sony Audio Service Manual (repair manual). Page 6

6

This section is extracted from
instruction manual.

1

*

Starts playback and enables 
navigation of the player’s on-screen 
menus.

2

*

Press to go up one list screen level, 
or to return to the previous menu.
Press and hold the BACK/HOME 
button to display the Home menu.

3

Use this jack to connect the supplied 
USB cable, or optional peripheral 
devices, such as supported 
accessories for the WM-PORT.

4

For connecting the headphones or the 
headphone extension cord. Insert the 
jack pin until it clicks into place. If 
the headphones are connected 
improperly, the sound from the 
headphones may not sound right.

Headphone 
extension cord

Headphones

5

*

Displays the Option menu.
If you press and hold the OPTION/
PWR OFF button, the screen turns 
off and the player enters the standby 
mode. If you press any button while 
the player is in the standby mode, 
the Now Playing screen appears and 
the player is ready for operation. 
Furthermore, if you leave the player 
in the standby mode for about a day, 
the player turns completely off 
automatically. If you press any button 
when the player is turned off, the 
start up screen appears first, then the 
Now Playing screen appears.

• The player consumes the battery very 

slightly even when it is in the standby 
mode. Therefore, the player might 
turn completely off in a short time, 
depending on the power remaining in 
the battery.

6

*

Adjusts the volume.

7

Resets the player when you press the 
RESET button with a small pin, etc. 

8

This is used to attach a strap (sold 
separately).

9

You can protect the player against 
accidental operation by using the 
HOLD switch when carrying it. By 
sliding the HOLD switch in the 
direction of the arrow, all operation 
buttons are disabled. If you slide the 
HOLD switch to the opposite 
position, the HOLD function is 
released. 

*

1

 There are tactile dots. Use them to help 

with button operations.

*

2

 Functions of marked with 

on the 

 

player are activated if you press and hold 
the corresponding buttons.