NW-A3000 - Sony Audio Service Manual (repair manual). Page 3

Read Sony NW-A3000 Service Manual online

3
NW-A3000
DESCRIPTION  OF  HDD  UNIT  SECTION  AND  NOTES
ON  REPLACEMENT  OF  HDD  UNIT  SECTION
In this set,there are two kinds of HDD unit section. Exchange it for
parts that suit the repair set according to the figure below.
SECTION  1
SERVICING  NOTES
UNLEADED SOLDER
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size)
: LEAD FREE MARK
Unleaded solder has the following characteristics.
Unleaded solder melts at a temperature about 40 ˚C higher
than ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350 ˚C.
Caution: The printed pattern (copper foil) may peel away if
the heated tip is applied for too long, so be careful!
Strong viscosity
Unleaded solder is more viscous (sticky, less prone to flow)
than ordinary solder so use caution not to let solder bridges
occur such as on IC pins, etc.
Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
NOTES  ON  REPLACEMENT  OF  CSP (CHIP  SIZE
PACKAGE)  IC
Replacement of CXR710160-215GH (IC3101), S1R72003BOOA100
(IC5001), SCF5250 (IC6005) , K4M281633H-BG75 (IC7001),
LC4128ZC-75MN132C-U5 (IC8001) and 
µ
PD68855F9-Y03-BA2-
E2-A (IC9001) used in this set requires a special tool.
COLOR  VARIATION
VIOLET
SILVER
BLACK
Canadian
z
z
AEP
z
z
z
UK
z
z
z
Australian
z
z
Chinese
z
z
Tourist
z
z
Singapore
z
z
Korean
z
z
Part No. : 1-868-525-11
Description: flexible board
Part No. : 2-653-380-01
Description: insulator (T1.8)
Part No. : 1-479-528-11
Description: HDD unit (20GB)
– HDD UNIT Section (for TOSHIBA) –
– HDD UNIT Section (for HITACHI) –
Part No. : 2-653-380-01
Description: insulator (T1.8)
Part No. : 2-629-604-61
Description: cushion 
(HDD1.5)
Part No. : 1-868-526-11
Description: flexible board
Part No. : 2-653-382-01
Description:insulator (HL1.8) 
Part No. : 1-479-527-11
Description: HDD unit (20GB)
Part No. : 2-653-383-01
Description: insulator (HR1.8) 
Ver. 1.5
Minimum System Requirements
•  Computer: IBM PC/AT or compatible computer preinstalled with Windows.
  CONNECT Player is compatible with the following Windows operating systems:
  -  Windows 2000 Professional (Service Pack 4 or later),
  -  Windows XP Home Edition,
  -  Windows XP Professional,
  -  Windows XP Media Center Edition,
  -  Windows XP Media Center Edition 2004,
  -  Windows XP Media Center Edition 2005
•  CPU: Pentium III 450 MHz or higher
•  RAM: 256 MB or greater (512 MB is recommended)
•  Hard Disk: 200 MB or greater of available space
  More space may be required depending on the version of the operating system. Additional space is 
required for storing music data.
• Display: 
    -  Colours: Medium (16 bit) (or higher) (CONNECT Player may not operate properly at colour settings 
    -  Screen Resolution: 800 
×
 600 pixcels (or higher) (1024 
×
 768 is recommended)
at or below 256 colours.)
•  CD-ROM drive (supporting Digital MusicCD playback capabilities using WMD)
To create original CDs or to back up audio CDs a CD-R/RW drive is required.
Page of 59
Display

Click on the first or last page to see other NW-A3000 service manuals if exist.