Read Sony NW-A25 / NW-A25HN / NW-A26HN / NW-A27HN Service Manual online
NW-A25/A25HN/A26HN/A27HN
12
Note: Follow the disassembly procedure in the numerical order given.
2-2. CASE REAR BLOCK
1
two screws
(M1.4)
knob hold
switch
Lid slot assy is floating.
(There is gap)
OK
Lid slot assy is flat.
(There is no gap)
NG
+RZWRFORVHWKHOLGVORWDVV\
4
claw
6
case rear block
4
claw
4
three claws
4
three claws
–
5HDUYLHZ–
bottom
top
2 Open the lid slot assy.
4
claw
4
three claws
4
claw
4
two claws
+RZWRLQVWDOOWKHFDVHUHDUEORFN
Note 2: When installing the case rear block,
while pulling the lid slot assy in the
direction of the arrow, align the switch
and knob hold.
knob hold
3 Insert the jig into the space and slowly
remove the case rear assy.
Note
1: When using a jig, please work carefully
so as not to damage the case rear assy
and panel front assy.
case rear assy
panel front assy
jig
5 Peel off the adhesive
sheet
FR.
+RZWRLQVWDOOWKHFDVHUHDUEORFN
Note 3: When installing the case rear block, be careful
not to pinch the adhesive sheet FR.
OK
NG
adhesive
sheet FR
sheet FR
lid slot assy
Click on the first or last page to see other NW-A25 / NW-A25HN / NW-A26HN / NW-A27HN service manuals if exist.