NW-A1200 - Sony Audio Service Manual (repair manual). Page 11

Read Sony NW-A1200 Service Manual online

11
NW-A1200
5-2. Audio
While playing the audio track, it's in a repeat state. If [BACK]
 
key is
pressed, it’s stopped.
Press the
 
[VOL +]
 
key to switch the HP/LINE.
The data for audio test mode is copied to hard disk drive from PC
via USB.
5-2-1. Output check
“1 kHz   0 dBs   L-ch/R-ch VOLUME: 27” audio signal is outputted.
Checking method:
1. Enter the test mode.
2. Press the
 
[  ]
B
 
key to display major item, and press the  [  ]
v
/ [  ]
V
key to select the “AUDIO”.
EL display
AUDIO
3. Press the
 
[  ]
B
 
key to display minor item, and press the  [  ]
v
/ [  ]
V
key to select the “OUTPUT”.
EL display
OUTPUT
4. Press the [     ]
u
 key, “START” is displayed and “1 kHz   0 dBs
L-ch/R-ch VOLUME: 27” audio signal is outputted. In this
state, each time [OPTION]
 
key  is pressed, MUTE ON/OFF
switch is performed.
EL display
START
5. Press the [BACK]
 
key, return to minor item selection screen.
5-2-2. S/N check
“Infinity Zero VOLUME: 27” audio signal is outputted.
Checking method:
1. Enter the test mode.
2. Press the
 
[  ]
B
 
key to display major item, and press the  [  ]
v
/ [  ]
V
key to select the “AUDIO”.
EL display
AUDIO
3. Press the
 
[  ]
B
 
key to display minor item, and press the  [  ]
v
/ [  ]
V
key to select the “SN”.
EL display
SN
4. Press the [     ]
u
 key, “START” is displayed and “Infinity Zero
VOLUME: 27” audio signal is outputted.
EL display
START
5. Press the [BACK]
 
key, return to minor item selection screen.
5-2-3. Frequency characteristic check
“20 Hz/20 kHz/100 Hz/10 kHz  0 dBs  L-ch/R-ch VOLUME: 21”
audio signal is outputted.
Checking method:
1. Enter the test mode.
2. Press the
 
[  ]
B
 
key to display major item, and press the  [  ]
v
/ [  ]
V
key to select the “AUDIO”.
EL display
AUDIO
3. Press the
 
[  ]
B
 
key to display minor item, and press the  [  ]
v
/ [  ]
V
key to select the “F 1”.
EL display
F 1
4. Press the [     ]
u
 key, “START” is displayed and “20 Hz   0 dBs
L-ch/R-ch VOLUME: 21” audio signal is outputted.
EL display
START
5. Press the [BACK]
 
key, return to minor item selection screen.
6. Press the  [  ]
v
/ [  ]
V
 key to select the “F 2”.
EL display
F 2
7. Press the [     ]
u
 key, “START” is displayed and “20 kHz   0 dBs
L-ch/R-ch VOLUME: 21” audio signal is outputted.
EL display
START
8. Press the [BACK]
 
key, return to minor item selection screen.
9. Press the  [  ]
v
/ [  ]
V
 key to select the “F 3”.
EL display
F 3
10. Press the [     ]
u
 key, “START” is displayed and “100 Hz   0 dBs
L-ch/R-ch VOLUME: 21” audio signal is outputted.
EL display
START
11. Press the [BACK]
 
key, return to minor item selection screen.
12. Press the  [  ]
v
/ [  ]
V
 key to select the “F 4”.
EL display
F 4
Page of 56
Display

Click on the first or last page to see other NW-A1200 service manuals if exist.