Read Sony NW-A1000 Service Manual online
3
NW-A1000
NOTES ON REPLACEMENT OF HDD UNIT
In this set, there are two kinds of HDD unit. (Refer to the figure
below)
Though either of parts for the repair is supplied, there is no problem
on the function even if which HDD unit is installed in the set.
below)
Though either of parts for the repair is supplied, there is no problem
on the function even if which HDD unit is installed in the set.
SECTION 1
SERVICING NOTES
UNLEADED SOLDER
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size)
: LEAD FREE MARK
Unleaded solder has the following characteristics.
•
Unleaded solder melts at a temperature about 40 ˚C higher
than ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350 ˚C.
Caution: The printed pattern (copper foil) may peel away if
than ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350 ˚C.
Caution: The printed pattern (copper foil) may peel away if
the heated tip is applied for too long, so be careful!
•
Strong viscosity
Unleaded solder is more viscous (sticky, less prone to flow)
than ordinary solder so use caution not to let solder bridges
occur such as on IC pins, etc.
Unleaded solder is more viscous (sticky, less prone to flow)
than ordinary solder so use caution not to let solder bridges
occur such as on IC pins, etc.
•
Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
NOTES ON REPLACEMENT OF CSP (CHIP SIZE
PACKAGE) IC
PACKAGE) IC
Replacement of CXR710160-215GH (IC3101), S1R72003BOOA100
(IC5001), SCF5250 (IC6005), K4M281633H-BG75 (IC7001),
LC4128ZC-75MN132C-U5 (IC8001) and
(IC5001), SCF5250 (IC6005), K4M281633H-BG75 (IC7001),
LC4128ZC-75MN132C-U5 (IC8001) and
µ
PD68855F9-Y03-BA2-
E2-A (IC9001) used in this set requires a special tool.
COLOR VARIATION
VIOLET SILVER
BLUE
PINK
BLACK
GOLD
Canadian
z
z
z
z
AEP
z
z
z
z
z
z
UK
z
z
z
z
z
z
Australian
z
z
z
z
Chinese
z
z
z
z
Tourist
z
z
z
z
Singapore
z
z
z
z
Korean
z
z
z
z
NOTES ON REPLACEMENT OF ORNAMENT (STRAP)
The shape of ornament (strap), cabinet (lower), and adhesive sheet
(strap) has been changed while producing. Please replace a part after
confirming which shape ornament (strap) is before it repairs.
(strap) has been changed while producing. Please replace a part after
confirming which shape ornament (strap) is before it repairs.
Ver. 1.5
ornament (strap)
ornament (strap)
ornament (strap): cirtcle
ornament (strap): oval
HITACHI type
Seagate type
Minimum System Requirements
• Computer: IBM PC/AT or compatible computer preinstalled with Windows.
CONNECT Player is compatible with the following Windows operating systems:
- Windows 2000 Professional (Service Pack 4 or later),
- Windows XP Home Edition,
- Windows XP Professional,
- Windows XP Media Center Edition,
- Windows XP Media Center Edition 2004,
- Windows XP Media Center Edition 2005
CONNECT Player is compatible with the following Windows operating systems:
- Windows 2000 Professional (Service Pack 4 or later),
- Windows XP Home Edition,
- Windows XP Professional,
- Windows XP Media Center Edition,
- Windows XP Media Center Edition 2004,
- Windows XP Media Center Edition 2005
• CPU: Pentium III 450 MHz or higher
• RAM: 256 MB or greater (512 MB is recommended)
• Hard Disk: 200 MB or greater of available space
More space may be required depending on the version of the operating system. Additional space is
More space may be required depending on the version of the operating system. Additional space is
required for storing music data.
• Display:
- Colours: Medium (16 bit) (or higher) (CONNECT Player may not operate properly at colour settings
- Screen Resolution: 800
×
600 pixels (or higher) (1024
×
768 is recommended)
at or below 256 colours.)
• CD-ROM drive (supporting Digital MusicCD playback capabilities using WMD)
To create original CDs or to back up audio CDs a CD-R/RW drive is required.
To create original CDs or to back up audio CDs a CD-R/RW drive is required.
Click on the first or last page to see other NW-A1000 service manuals if exist.