Read Sony MHC-WX5 / MHC-WX7AV / STR-WX5 Service Manual online
8
PANEL Aging Mode
This mode is used for opening and closing the sliding panel continuously.
Setting the aging mode :
With the set at standby condition, press FLASH button, ENTER/NEXT button and STEREO/MONO button together.
The aging will start and sliding panel will follow aging sequence as described below.
The aging will start and sliding panel will follow aging sequence as described below.
• When problems occur ;
Aging stops and “AGING ERROR” is displayed on the fluorescent indicator tube.
• When no problems;
Aging is carried out repeatedly. After 65000 times, “AGING STOP” is displayed and aging stops.
Aging Sequence
Counts up
n
n
Panel open
Panel close
n
Stops for one second in the opened state
Stops for one second in the closed state
Each time the DISPLAY/DEMO button is pressed, the display switches as follows.
AGING @@@@@ (No. of agings carried out)
OP MAX @.@@ (Maximum time taken for OPEN:In seconds)
OP MIN @.@@ (Minimum time taken for OPEN:In seconds)
CL MAX @.@@ (Maximum time taken for CLOSE:In seconds)
CL MIN @.@@ (Minimum time taken for CLOSE:In seconds)
Click on the first or last page to see other MHC-WX5 / MHC-WX7AV / STR-WX5 service manuals if exist.