Read Sony MHC-GTX88 / MHC-GTX88BP / SS-GTX88 / SS-RSX88 / SS-WG88A / SS-WG88B Service Manual online
1
Ver. 1.1 2008. 03
SERVICE MANUAL
E Model
Australian Model
SS-GTX88/RSX88/WG88A/WG88B
SS-GTX88P/WG88P
SPECIFICATIONS
Sony Corporation
Audio Business Group
Published by Sony Techno Create Corporation
9-887-752-02
2008C04-1
© 2008. 03
SPEAKER SYSTEM
(SS-WG88A)
(SS-RSX88)
(SS-GTX88)
• SS-GTX88 is the front speaker in MHC-GTX88/GTX88BP.
• SS-RSX88 is the surround speaker in MHC-GTX88/GTX88BP.
• SS-WG88A/WG88B are the subwoofer in MHC-GTX88/GTX88BP.
• SS-GTX88P is package speaker of front and surround speaker in MHC-GTX88/GTX88BP.
• SS-WG88P is package speaker of subwoofer A subwoofer B in MHC-GTX88/GTX88BP.
• SS-RSX88 is the surround speaker in MHC-GTX88/GTX88BP.
• SS-WG88A/WG88B are the subwoofer in MHC-GTX88/GTX88BP.
• SS-GTX88P is package speaker of front and surround speaker in MHC-GTX88/GTX88BP.
• SS-WG88P is package speaker of subwoofer A subwoofer B in MHC-GTX88/GTX88BP.
Front speaker SS-GTX88
Speaker system
2-way, 2-unit, bass-reflex type
Speaker units
Woofer:
Woofer:
20 cm, cone type
Tweeter:
2.5 cm, horn type
Rated impedance
8
Ω
Dimensions (w/h/d)
Approx. 281
×
415.2
×
313 mm
Mass
Approx. 6.9 kg net per
speaker
speaker
Surround speaker SS-RSX88
Speaker system
2-way, 2-unit, bass-reflex type
Speaker units
Woofer:
Woofer:
10 cm, cone type
Tweeter:
4 cm, horn type
Rated impedance
24
Ω
Dimensions (w/h/d)
Approx. 176
×
361.7
×
222.5 mm
Mass
Approx. 2.9 kg net per
speaker
speaker
Subwoofer A SS-WG88A/
Subwoofer B SS-WG88B
Subwoofer B SS-WG88B
Subwoofer system
1-way, 1-unit, bass-reflex type
Speaker units
Subwoofer:
Subwoofer:
25 cm, cone type
Rated impedance
6
Ω
Dimensions (w/h/d)
SS-WG88A:
SS-WG88A:
Approx. 351
×
415.2
×
350.2 mm
SS-WG88B:
Approx. 351
×
415.2
×
342.8 mm
Mass
Approx. 8.2 kg
Design and specifications are subject to change without
notice.
notice.
(SS-WG88B)
2
SS-GTX88/RSX88/WG88A/WG88B
• JIG
When disassembling the set, use the following jig (for front panel
removal).
Part No.: J-2501-238-A JIG FOR SPEAKER REMOVAL
removal).
Part No.: J-2501-238-A JIG FOR SPEAKER REMOVAL
Unleaded solder
Boards requiring use of unleaded solder are printed with the lead
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
: LEAD FREE MARK
Unleaded solder has the following characteristics.
•
Unleaded solder melts at a temperature about 40°C higher than
ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350°C.
Caution: The printed pattern (copper foil) may peel away if
the heated tip is applied for too long, so be careful!
ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350°C.
Caution: The printed pattern (copper foil) may peel away if
the heated tip is applied for too long, so be careful!
•
Strong viscosity
Unleaded solder is more viscous (sticky, less prone to flow)
than ordinary solder so use caution not to let solder bridges
occur such as on IC pins, etc.
Unleaded solder is more viscous (sticky, less prone to flow)
than ordinary solder so use caution not to let solder bridges
occur such as on IC pins, etc.
•
Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
3
SS-GTX88/RSX88/WG88A/WG88B
1-1. PRINTED WIRING BOARD (SS-WG88A)
SECTION 1
DIAGRAMS
Note on Printed Wiring Boards:
•
•
X
: parts extracted from the component side.
•
: Pattern from the side which enables seeing.
(The other layers' patterns are not indicated.)
• Indication of transistor.
B
These are omitted.
C
E
Q
1
A
B
C
D
E
2
3
4
SUBWOOFER
ON/OFF
HCD-GTX88
BOARD
SWPANEL
11
(11)
1-872-864-
S1400
SUBWOOFER
LEVEL
RV1400
Q1400
R1405
R1408
R1407
R1400
R1406
JR1400
JR1403
JR1401
D1400
C1400
CN1400
1
4
E
4
SS-GTX88/RSX88/WG88A/WG88B
1-2. SCHEMATIC DIAGRAM (SS-WG88A)
Note on Schematic Diagram:
• All capacitors are in µF unless otherwise noted. (p: pF) 50 WV or
• All capacitors are in µF unless otherwise noted. (p: pF) 50 WV or
less are not indicated except for electrolytics and tantalums.
• All resistors are in
Ω
and
1
/
4
W or less unless otherwise specified.
•
C
: panel designation.
•
A
: B+ Line.
• Voltages are dc with respect to ground in service mode.
no mark : POWER ON
• Voltages are taken with a VOM (Input impedance 10 M
Ω
).
Voltage variations may be noted due to normal production toler-
ances.
ances.
JR1400
C1400
R1406
R1405
D1400
Q1400
S1400
CN1400
0
JR1401
0
JR1403
0
10
50V
1k
1k
R1408
180k
R1400
180k
RV1400
50k
R1407
2.2k
SELU5420E
(GREEN)
2SC2712
LED DRIVE
4P
SUBWOOFER
ON/OFF
SUBWOOFER
ON/OFF
SUBWOOFER
LEVEL
HCD-GTX88
