Read Sony ICF-F11S / ICF-F12S Service Manual online
ICF-F11S/F12S
5
Note: Follow the assembly procedure in the numerical order given.
3-5. GEAR (VC) AND MAIN BOARD SETTING
gear (VC)
knob (tune)
Install the gear (VC)
as shown in figure.
as shown in figure.
Down the pointer.
pointer
Set the second concave portion
of pointer to the convex part
of the gear (VC).
first concave portion
rib of front cabinet
Match two gears.
Rotate knob (VOL)
in the direction
of the arrow fully.
Rotate the shaft of RV1 in the direction
of the arrow fully.
Rotate the shaft of CV1 in the direction
of the arrow fully.
two screws
MAIN board
The vicinity of hole at center
of gear (VC) and the pointer
must be parallel.
of gear (VC) and the pointer
must be parallel.
Note:
Match the convex part of the gear (VC) to the second concave portion of pointer
with pointer lowered most.
Click on the first or last page to see other ICF-F11S / ICF-F12S service manuals if exist.