Read Sony ICF-CD832 Service Manual online
13
ICF-CD832
IC701
C730
R729
R708
C716
C711
C709
FB701
C736
C734
R709
C705
R704
R702
R711
R710
R703
R705
R701
C703
C731
R706
R723
C708
JC703
C743
C744
C745
C742
C707
C717
C739
C738
TP
(VREF)
TP
(TE)
TP
(FE)
TP
(RF)
C732
TY
FY
TX
FX
JW706
JW707
JW708
JW709
JW724
JW726
C746
C747
TP
(RF)
TP
(VREF)
TP
(TE)
– CD board (conductor side) –
CD SECTION
CD section adjustments are done automatically in this set.
In case of operation check, confirm that focus bias.
In case of operation check, confirm that focus bias.
FOCUS BIAS CHECK
1. Connect the oscilloscope between IC701 pin 4 and pin qa (or
TP (RF) and TP (VREF)).
2. Insert the disc (YEDS-18). (Part No. : 3-702-101-01)
3. Press the N X (CD) button.
4. Confirm that the oscilloscope waveform is as shown in the
3. Press the N X (CD) button.
4. Confirm that the oscilloscope waveform is as shown in the
figure below. (eye pattern)
A good eye pattern means that the diamond shape ( ) in the
center of the waveform can be clearly distinguished.
A good eye pattern means that the diamond shape ( ) in the
center of the waveform can be clearly distinguished.
• RF signal reference waveform (eye pattern)
Test Point:
RF level :
0.85
0.85
±
0.2 Vp-p
VOLT/DIV : 50 mV (10 : 1 probe in use)
TIME/DIV : 500 nS
TIME/DIV : 500 nS
When observing the eye pattern, set the oscilloscope for AC range
and raise vertical sensitivity.
and raise vertical sensitivity.
Click on the first or last page to see other ICF-CD832 service manuals if exist.