Read Sony ICF-C717PJ Service Manual online
ICF-C717PJ
10
SECTION 3
TEST MODE
TEMPERATURE SWITCH MODE
Procedure:
1. Press the [SNOOZE/BRIGHTNESS] and [DATE/DST] but-
Procedure:
1. Press the [SNOOZE/BRIGHTNESS] and [DATE/DST] but-
tons simultaneously.
2. The temperature display (Centigrade/Fahrenheit) on the liquid
crystal display changes.
ONE DAY ALARM ON/OFF MODE
Procedure:
1. Press the [
Procedure:
1. Press the [
A ALARM ON/OFF], [ALARM ON/OFF B] and
[DISPLAY/CLOCK] buttons simultaneously.
2. The message “On” appears on the liquid crystal display, and
the one day alarm function turns on.
Note: It becomes impossible for the customer to select “WEEKDAY
WEEKEND” in the alarm setting. Do not use it usually.
3. To release this mode, Press the [
A ALARM ON/OFF],
[ALARM ON/OFF
B] and [DISPLAY/CLOCK] buttons si-
multaneously. The message “OFF” appears on the liquid crys-
tal display, and the one day alarm function turns off.
tal display, and the one day alarm function turns off.
AM FREQUENCY STEP CHANGE MODE (Singapore
model only)
Procedure:
1. Press the [OFF] button to select the clock mode.
2. Press the [RADIO], [OFF] and [DATE/DST] buttons simulta-
model only)
Procedure:
1. Press the [OFF] button to select the clock mode.
2. Press the [RADIO], [OFF] and [DATE/DST] buttons simulta-
neously.
3. The AM step changed between 9 kHz/0.05 MHz and 10
kHz/0.1 MHz.
FIRMWARE VERSION DISPLAY MODE
Procedure:
1. Press the [AUDIO IN] button to select the “AUDIO IN”.
2. Press the [
Procedure:
1. Press the [AUDIO IN] button to select the “AUDIO IN”.
2. Press the [
–
TIME SET] (left side), [– TIME SET] (right side)
and [NATURE SOUND/PRESET 1] buttons simultaneously.
3. The
fi rmware version appears on the liquid crystal display.
AUTO TIME SET MODE
Note: Execute this mode only when it is necessary to execute reset of the
time setting and radio preset.
Procedure:
1. Press the [OFF] button to select the clock mode.
2. Press the [VOL +], [TUNING +] and [SLEEP] buttons simul-
1. Press the [OFF] button to select the clock mode.
2. Press the [VOL +], [TUNING +] and [SLEEP] buttons simul-
taneously.
3. The
t
ime setting and radio preset are reset.
PROJECTOR ALL SEGMENTS DISPLAY MODE
Procedure:
1. Press the [OFF] button to select the clock mode.
2. Press the [
Procedure:
1. Press the [OFF] button to select the clock mode.
2. Press the [
–
TIME SET] (left side), [– TIME SET] (right side)
and [PROJECTION ROTATE] buttons simultaneously.
3. All segments of the projector are lighted up.
4. To release this mode, Press the [PROJECTION ON/OFF] but-
ton.
LIQUID CRYSTAL DISPLAY ALL SEGMENTS DISPLAY
MODE
Procedure:
1. Press the [AUDIO IN] button to select the “AUDIO IN”.
2. Press
MODE
Procedure:
1. Press the [AUDIO IN] button to select the “AUDIO IN”.
2. Press
the
[
–
TIME SET] (left side), [– TIME SET] (right side)
and [TUNING +] buttons simultaneously.
3. All segments of the liquid crystal display are lighted up.
4. To release this mode, Press the any buttons.
OUTPUT 32 kHz FREQUENCY MODE
Procedure:
1. Press
Procedure:
1. Press
the
[
–
TIME SET] (left side), [– TIME SET] (right side)
and [TUNING –] buttons simultaneously.
2. After 10 seconds, 32.768 kHz can be measured through the
BUZZER pin.
3. To release this mode, Press the [OFF] button.
Click on the first or last page to see other ICF-C717PJ service manuals if exist.