Read Sony ICD-UX71 / ICD-UX71F / ICD-UX81 / ICD-UX81F / ICD-UX91F Service Manual online
ICD-UX71/UX71F/UX81/UX81F/UX91F
9
SECTION 3
TEST MODE
This set provides the checks given blow in TEST MODE.
Setting the TEST MODE
Turn on power to the set. Turn on [DPC] switch from the off state
while pressing [MENU] key and [
Turn on power to the set. Turn on [DPC] switch from the off state
while pressing [MENU] key and [
.
] button at the same time.
Exiting the TEST MODE
Turn off power.
Turn off power.
TEST MODE Menu
The menu given below appears when TEST MODE is entered.
The menu given below appears when TEST MODE is entered.
Select an item using [
v
]/[
V
] key and determine the selected item
using [ENT] key.
1. Version
Check the version of each module.
Check the version of each module.
ICD-UXx1 build: Language
(JP: Japanese, US: English, CN: Simplifi ed Chi-
nese, CNS: Traditional Chinese, KR: Korean,
RU: Russian and TH: Thai)
nese, CNS: Traditional Chinese, KR: Korean,
RU: Russian and TH: Thai)
(ICD-UX91 (4GB), ICD-UX81 (2GB), ICD-UX71 (1GB))
Charge: C (With), No display (Without)
F/W: Version
D: NAND DEVICE CODE
M: NAND Marker CODE
Destination: J, U, CE7, E, KR3, CN, CE7-FM, LA, LA-FM
Charge: C (With), No display (Without)
F/W: Version
D: NAND DEVICE CODE
M: NAND Marker CODE
Destination: J, U, CE7, E, KR3, CN, CE7-FM, LA, LA-FM
2. KeyChk+Fmt
Check the input by pressing each key.
Check the input by pressing each key.
Input and INT check (KEY input acceptance check and KEY_
WAKE interrupt check).
WAKE interrupt check).
Target input keys:
[
[
z
]/[
x
]/[
>
]/[
u
]/[
.
]/[A-B]/[MENU]/[VOL+]/[VOL–]/[
v
]/
ENT/[
V
]/DEVIDE/HOLD OFFtON/DPC OFFtON
Total of 15 key locations
The backlight is lit for 0.5 sec. when a key input is accepted.
When all the inputs have been confi rmed at least once, format the
NAND fl ash memory (delete all entries) and set the MENU set-
tings to their defaults. (Hold the LCD contrast setting.)
* Once the NAND memory has been normally formatted, restart
NAND fl ash memory (delete all entries) and set the MENU set-
tings to their defaults. (Hold the LCD contrast setting.)
* Once the NAND memory has been normally formatted, restart
the system.
3. Loop
Perform a ADDA LOOP BACK.
Perform a ADDA LOOP BACK.
External mic input: HP/SP output change
HP INSERT: Change to L/H
ALC function: OFF
HP INSERT: Change to L/H
ALC function: OFF
HP output is selected independent of whether HP is installed or not
when there is no external microphone (this is provided for anti-
howl back). Selection of HP or SP output is determined only upon
entry into Loop. There is no switching on the way.
when there is no external microphone (this is provided for anti-
howl back). Selection of HP or SP output is determined only upon
entry into Loop. There is no switching on the way.
[PLAY]: Loop Back Start
[VOL+], [VOL–]: Volume operation to set. (Initial value 20)
[DPC]: OFF: Sensitivity H, ON: Sensitivity L
[A-B]: External mic select (MIC IN t AUDIO IN)
[VOL+], [VOL–]: Volume operation to set. (Initial value 20)
[DPC]: OFF: Sensitivity H, ON: Sensitivity L
[A-B]: External mic select (MIC IN t AUDIO IN)
4. SetMic Cal
Write the correction value for the level difference between L and R
channels of the internal stereo microphone into the NAND memo-
ry. With the L channel level as the reference, measure the R chan-
nel recording level. Then adjust the R channel’s ADC VOL level so
that the R channel level is equal to the L channel level.
* Make a mental note of the setting even when the battery has been
Write the correction value for the level difference between L and R
channels of the internal stereo microphone into the NAND memo-
ry. With the L channel level as the reference, measure the R chan-
nel recording level. Then adjust the R channel’s ADC VOL level so
that the R channel level is equal to the L channel level.
* Make a mental note of the setting even when the battery has been
removed.
[PLAY]: Recording start
LCD display
Version
KeyChk+Fmt
Loop
Loop
Version
7
W
+
Datermine using ENT key.
KeyChk+Fmt
Loop
SetMic Cal
Beep
Lcd Cont
RTC Int
Battery
Batt AB4
VBUS TEST
MENU INIT
Sleep
Version
Loop
SetMic Cal
Beep
Lcd Cont
RTC Int
Battery
Batt AB4
VBUS TEST
MENU INIT
Sleep
Version
•
•
•
•
•
•
•
•
K
LCD display
<KEY CHECK>
KEY:
KEY:
− −
REMAIN: 15
Display the key of
which input is accepted.
which input is accepted.
Total of 15 keys counted.
LCD display
<Loop> MIC:L
Vol:20 MIC IN
Vol:20 MIC IN
LCD display
<SetMic Cal>
R-ch: –02dB
R-ch: –02dB
LCD display
ICD-UXx1 US C
F/W v1.10.02
D:D3 M:EC E
D:D3 M:EC E
Click on the first or last page to see other ICD-UX71 / ICD-UX71F / ICD-UX81 / ICD-UX81F / ICD-UX91F service manuals if exist.