Read Sony ICD-UX502 Service Manual online
ICD-UX502
3
ABOUT THE BOARDS REPLACING
When the boards installed in this unit are defective, exchange the
complete mounted board.
However the microphone jack (J301) and headphone jack (J302)
on the MAIN board are exchangeable. Refer to “4. EXPLODED
VIEWS” (page 18).
When the boards installed in this unit are defective, exchange the
complete mounted board.
However the microphone jack (J301) and headphone jack (J302)
on the MAIN board are exchangeable. Refer to “4. EXPLODED
VIEWS” (page 18).
ABOUT THE DESTINATION SETTING WHEN REPLAC-
ING THE MAIN BOARD
When the MAIN board of this unit is replaced, perform processing
according to the following procedure.
ING THE MAIN BOARD
When the MAIN board of this unit is replaced, perform processing
according to the following procedure.
Precaution
The contents which are not opened to customers are included
in the following procedure. After you are cautious of handling of
information, execute work under the suffi cient administration.
The contents which are not opened to customers are included
in the following procedure. After you are cautious of handling of
information, execute work under the suffi cient administration.
1. About the preparing of tools
Download the tools used by this work from the homepage of TISS.
When the tools cannot be confi rmed by TISS, confi rm to the ser-
vice headquarters.
Download the tools used by this work from the homepage of TISS.
When the tools cannot be confi rmed by TISS, confi rm to the ser-
vice headquarters.
2. Setting
method
Note:
The destination setting is impossible when battery voltage is not
enough.
Do work using the battery with suffi cient battery level.
Procedure:
1. Equip this unit with battery.
2. Connect this unit to the PC.
1. Equip this unit with battery.
2. Connect this unit to the PC.
To USB port of PC
IC recorder
PC
3. Unzip the model setting fi le to get folder on PC.
4. Open the unzipped folder and choose the following folder.
ICD_UX502_CE7
5. Copy
4. Open the unzipped folder and choose the following folder.
ICD_UX502_CE7
5. Copy
the
“DEVINFO.UPG”
fi le included in the folder selected
at step 4 to root folder of this unit.
6. Remove this unit from the PC.
7. “Updating” is displayed on the screen of this unit, and this unit
7. “Updating” is displayed on the screen of this unit, and this unit
is rebooted automatically.
8. The destination setting is completed.
3. Confi rmation method
Procedure:
1. Equip this unit with battery.
2. Slide the [HOLD•POWER] switch in the direction of “POW-
Procedure:
1. Equip this unit with battery.
2. Slide the [HOLD•POWER] switch in the direction of “POW-
ER” until the window display appears.
3. Slide the [DPC (SPEED CTRL)] switch to OFF.
4. While pressing the [STOP/
x
] and [VOL –] keys, slide the
[DPC (SPEED CTRL)] switch to ON.
5. The test mode menu is displayed, and enter the test mode. Re-
lease the [STOP/
x
] and [VOL –] keys.
6. Confi rm that the destination has been changed.
(Displayed characters/values in the following fi gure are ex-
ample)
ample)
<SERVICE MENU>
ICD-UX502/CE7
1.00.01
1.00.01
LCD Display
Destination
Model name
Firmware version
Model name
Firmware version
7. Remove battery to release the test mode.
Click on the first or last page to see other ICD-UX502 service manuals if exist.