• Service Manuals |
  • Sony |
  • Audio |
  • ICD-PX312, ICD-PX312D, ICD-PX312F, ICD-PX312 M, ICD-PX312M (serv.man2)

ICD-PX312, ICD-PX312D, ICD-PX312F, ICD-PX312 M, ICD-PX312M (serv.man2) - Sony Audio Service Manual (repair manual). Page 12

Read Sony ICD-PX312 / ICD-PX312D / ICD-PX312F / ICD-PX312 M / ICD-PX312M (serv.man2) Service Manual online

ICD-PX312/PX312D/PX312F/PX312M
12
15. Sleep test
•  A transition to the sleep state is made for measurement of the 
standby current.
 
LCD DISPLAY
B 
ENTER
<SLEEP>
Please Enter
B 
ENTER
SET UP
<SLEEP>
SLEEP : NORMAL
•  A transition to SLEEP state selection is made after power-on.
 
[PLAY]:  The mode is determined. A transition to SLEEP is 
made.
•  The transition from this mode to other mode is inhibited.
•  To exit this mode, disconnect power (unplug the battery.)
•  When the WakeUP signal is detected, the system is rebooted.
16. BATT Lift test
•  A result of measurement made through the battery life mea-
surement F/W is indicated on the LCD.
•  It is impossible to check this in service because the measure-
ment FW is required.
17. CHG LOG test (Not used in this set)
•  A log for charging held in the SRAM is copied to the eMMC.
 
LCD DISPLAY
B 
ENTER
<CHG LOG>
Please Enter
<CHG LOG>
Success
•  After power-on, a log for charging is copied to the eMMC.
•  An OK/NG result is displayed.
•  Press the [
x
] button to return to the test mode screen.
18. MENU INIT lnit
•  The menu setting is reset to the factory setting.
 
LCD DISPLAY
B 
ENTER
<MENU INIT>
Please Enter
<MENU INIT>
Formatting...
Formatting...
<MENU INIT>
Succes
•  A transition to the initialization wait state is made after MENU 
INIT.
 
[PLAY]: The mode is determined.
 
 
The initialization is executed.
•  An OK/NG result is displayed.
•  Press the [
x
] button to return to the test mode screen.
Page of 40
Display

Click on the first or last page to see other ICD-PX312 / ICD-PX312D / ICD-PX312F / ICD-PX312 M / ICD-PX312M (serv.man2) service manuals if exist.

Random: