Read Sony ICD-P620 Service Manual online
ICD-P620
6
SECTION 3
TEST MODE
1. Outline of the TEST MODE
The TEST MODE is designed to help verify the set when servic-
ing it.
The TEST MODE is only menu driven to select modes for servic-
ing.
The TEST MODE is designed to help verify the set when servic-
ing it.
The TEST MODE is only menu driven to select modes for servic-
ing.
2. Entering and Canceling the TEST MODE
With the power on, turn on the [HOLD] switch while pressing the
[
With the power on, turn on the [HOLD] switch while pressing the
[
x
] button and the [DISPLAY/MENU] button at the same time.
3. Canceling the TEST MODE
The TEST MODE can be cancelled by turning off the power (un-
plugging the dry battery).
The TEST MODE can be cancelled by turning off the power (un-
plugging the dry battery).
4. Menu Key Designation
The menu has the fi ve modes described below. The following keys
are assigned on the initial screen (version display).
The menu has the fi ve modes described below. The following keys
are assigned on the initial screen (version display).
5. Key
Assignment
From within TEST MODE, the intended menu can be entered by
using the appropriate one key of the following key.
using the appropriate one key of the following key.
LCD Test (All On
yAll Off)
DISPLAY/MENU
BEEP Test (1.3 kHz)
ERASE
HQ-DSP LOOP
zXREC
SP-DSP LOOP
– .
LP-DSP LOOP
> +
USB Test
NxPLAY/ENTER
REST MENU Test
DIVIDE
Initial Display from each mode
x
5-1. Initial Display in TEST MODE
LCD indications (destination information, memory capacity, CPU
FW information and MIC sens) when TEST MODE is entered:
LCD indications (destination information, memory capacity, CPU
FW information and MIC sens) when TEST MODE is entered:
Memory capacity
(512-512 MB)
(512-512 MB)
MIC sens
Destination
information
information
CPU FW information
5-2. LCD Test
To enter the LCD Test, press the [DISPLAY/MENU] button. The
LCD Test has two modes: All On and All Off First all the indica-
tors are on. All the indicators are off when the button is pressed
again.
To enter the LCD Test, press the [DISPLAY/MENU] button. The
LCD Test has two modes: All On and All Off First all the indica-
tors are on. All the indicators are off when the button is pressed
again.
ALL ON
DISPLAY/MENU
Switch between
the modes.
the modes.
ALL OFF
Press the [
x
] button to return to the initial display (destination
information, memory capacity, CPU FW information and MIC
sens).
sens).
5-3. BEEP Test
To enter the BEEP Test, press the [ERASE] button.
To enter the BEEP Test, press the [ERASE] button.
Beep: Frequency 1.3 kHz only
Press the [
x
] button to return to the initial screen (memory and
CPU version).
5-4. DSP LOOP
The DSP LOOP modes can be entered selectively by pressing the
appropriate one of the following three keys.
Within the LOOP test menu, “LOOP” is displayed. The sensitivity
character H or L is displayed depending on the position into which
the [HOLD] switch is placed.
The sensitivity H is displayed when [HOLD] switch is in the ON
position. The sensitivity L is displayed when [HOLD] switch is in
the OFF position.
The DSP LOOP modes can be entered selectively by pressing the
appropriate one of the following three keys.
Within the LOOP test menu, “LOOP” is displayed. The sensitivity
character H or L is displayed depending on the position into which
the [HOLD] switch is placed.
The sensitivity H is displayed when [HOLD] switch is in the ON
position. The sensitivity L is displayed when [HOLD] switch is in
the OFF position.
[9 REC
To change the DSP LOOP test mode, press the [
x
] button, then
select the [
zX
REC] button, [–
.
] button, or [
>
+] button.
In a DSP Test mode, to select another DSP Test mode and to select
the other sensitivity, the [
the other sensitivity, the [
x
] button also has to be pressed.
Click on the first or last page to see other ICD-P620 service manuals if exist.