Read Sony ICD-MX20 / ICD-MX20VTP Service Manual online
4
ICD-MX20/MX20VTP
Step 2: Setting the Clock
You need to set the clock to use the alarm function or record the date and time.
When you insert batteries for the first time, or when you insert batteries after
the unit has been without batteries for a certain period of time, “Set
Date&Time” appears. Set the date and time as follows:
When you insert batteries for the first time, or when you insert batteries after
the unit has been without batteries for a certain period of time, “Set
Date&Time” appears. Set the date and time as follows:
Press the control key upward, downward, leftward, or
rightward (v/V/b/B) to select an item, and then press
down the center (Nx) to decide on the item.
In this manual, these operations are described as follows:
rightward (v/V/b/B) to select an item, and then press
down the center (Nx) to decide on the item.
In this manual, these operations are described as follows:
Press v (.).
Press B (
;).
Press b (MENU).
Press Nx.
1
Press v/V to select the digits for the year.
v: to decrease the number
V: to increase the number
V: to increase the number
2
Press Nx.
The month digits will flash.
3
Repeat steps 1 and 2 to set the month, day,
hour, and then minutes in sequence.
hour, and then minutes in sequence.
To select a previous or next item
Press b for the previous item or B for the next
item.
Note
Press b for the previous item or B for the next
item.
Note
If you do not press Nx for more than one minute,
the clock setting mode is cancelled and the window
will return to normal display.
the clock setting mode is cancelled and the window
will return to normal display.
4
Press xSTOP to return to the normal
display.
display.
Press V (>).
Note on setting the clock
Set the clock while the set is in the
stop mode.
stop mode.
To display the clock setting
window and current time
window and current time
You can display the clock setting
window to set the date and time or
check the current time:
window to set the date and time or
check the current time:
1
Press b (MENU) to display the
menu.
menu.
2
Press v/V to select
(Preferences)
and then press Nx.
3
Press v/V to select “Date&Time”.
The current time is displayed in the
right bottom of the display
window.
The current time is displayed in the
right bottom of the display
window.
4
To set the clock, press Nx to
display the “Date&Time” window
and follow the steps 1 through 4 of
the “Step 2: Setting the Clock”.
display the “Date&Time” window
and follow the steps 1 through 4 of
the “Step 2: Setting the Clock”.
Tip
This unit does not have a power on/
off switch. The display is shown at all
times.
off switch. The display is shown at all
times.
Click on the first or last page to see other ICD-MX20 / ICD-MX20VTP service manuals if exist.