Read Sony ICD-FX8 Service Manual online
ICD-FX8
9
SECTION 3
TEST MODE
1. SETTING THE TEST MODE
Note: Test mode is impossible when battery voltage is not enough.
Do work using the battery with suffi cient battery level.
Setting method:
1. Equip this unit with battery.
2. Slide the [HOLD•POWER ON/OFF] switch in the direction of
1. Equip this unit with battery.
2. Slide the [HOLD•POWER ON/OFF] switch in the direction of
“POWER ON/OFF” until the window display appears.
3. Slide the [HOLD•POWER ON/OFF] switch towards the cen-
ter.
4. While pressing the [
x
] and [VOL –] keys, slide the
[HOLD•POWER ON/OFF] switch in the direction of “HOLD”.
5. The test mode menu is displayed, and enter the test mode. Re-
lease the [
x
] and [VOL –] keys.
(Displayed characters/values in the following fi gure are ex-
ample)
ample)
N 1.00.00
02
LCD Display
Memory capacity
Firmware version
Destination
Firmware version
Destination
2. RELEASING THE TEST MODE
Remove battery.
Remove battery.
3. CONFIGURATION OF THE TEST MODE
[
.
] key
[
>
] key
Main menu
LCD
BEEP
AUDIO
BATAD
RTC
BATT LIFE
SLEEP
USB
COUNT
VERSION
KEY
INIT
Main menu
J
j
k
K
Normal mode
6OLGHWKH>+2/'32:(5212))@VZLWFK
WRZDUGVWKHFHQWHU
:KLOHSUHVVLQJWKH>x@DQG>92/±@NH\V
VOLGHWKH>+2/'32:(5212))@VZLWFK
LQWKHGLUHFWLRQRI³+2/'´
5HOHDVHWKH>
x
@DQG>92/±@NH\V
5HPRYHEDWWHU\
,QLWLDOVWDWHRIWHVWPRGH
(QGRIWHVWPRGH
Determine
XVLQJ
[(17(5
N
]
key
5HWXUQXVLQJ
[
x
] key
4. OPERATION OF THE TEST MODE
4-1. Main menu
Destination, fi rmware version and memory capacity can be con-
fi rmed.
4-1. Main menu
Destination, fi rmware version and memory capacity can be con-
fi rmed.
Procedure:
1. Enter the test mode.
2. Destination, fi rmware version and memory capacity are dis-
1. Enter the test mode.
2. Destination, fi rmware version and memory capacity are dis-
played on LCD display.
(Displayed characters/values in the following fi gure are ex-
ample)
ample)
N 1.00.00
02
LCD Display
Memory capacity
Firmware version
Destination
Firmware version
Destination
Key input settings under this mode of operation:
[VOL +]
: Volume up
[VOL –]
: Volume down
[REC/PAUSE/
z
]
: Microphone sensitivity change
[ DISPLAY/ MENU] : ALC on/off change (default: off)
The settings of volume, microphone sensitivity and DPC on/off
changed in this mode becomes effective also the modes other than
“4-2. LCD” and “4-4. AUDIO”.
changed in this mode becomes effective also the modes other than
“4-2. LCD” and “4-4. AUDIO”.
Click on the first or last page to see other ICD-FX8 service manuals if exist.