Read Sony ICD-B510F Service Manual online
7
ICD-B510F
To change the sensitivity again, press the
x STOP
button and change
the [HOLD] switch.
In a DSP Test mode, changing the mode and changing the sensitivity
require the
In a DSP Test mode, changing the mode and changing the sensitivity
require the
x STOP
button be pressed.
5-5. RESET MENU
To enter the RESET MENU test, press the [DIVIDE] button.
When all of the buttons or controls located on the set are operated,
the system shows “Ok” if all of them are normally operated.
An operation of a switch is indicated by the number for verification
in order to make a simple indication.
To enter the RESET MENU test, press the [DIVIDE] button.
When all of the buttons or controls located on the set are operated,
the system shows “Ok” if all of them are normally operated.
An operation of a switch is indicated by the number for verification
in order to make a simple indication.
Note 1: When 10 different operations of the switches are normally
made in any order (regardless of the order that pushbuttons
are pressed and the slide switch is set to ON and OFF),
the system shows “Ok”.
are pressed and the slide switch is set to ON and OFF),
the system shows “Ok”.
Note 2: Clear memory when “ACCESS” is blinking on the display.
(Do this before “Ok” is shown.) To exit from this menu,
the power has to be turned off (battery to be removed).
the power has to be turned off (battery to be removed).
Sensitivity H
HOLD
ON
OFF
H
Sensitivity L
HOLD
L
r
r
Press DIVIDE button.
Indication after DIVIDE
button is pressed.
button is pressed.
Indication after DISPLAY/MENU
button is pressed.
button is pressed.
Indication after zX REC/PAUSE
button is pressed.
button is pressed.
Indication after HOLD is
set to OFF.
set to OFF.
Indication after HOLD is
set to ON.
t If any key is not pressed,
the system waits for the key
to be pressed.
set to ON.
t If any key is not pressed,
the system waits for the key
to be pressed.
Clear memory when “ACCESS” is
blinking on the display.
The system shows “Ok”.
blinking on the display.
The system shows “Ok”.
••••••
r
r
r
H
Click on the first or last page to see other ICD-B510F service manuals if exist.