Read Sony ICD-B10 / ICD-B15 Service Manual online
7
ICD-B10/B15
Basic Oper
ations
19
GB
Erasing Messages
You can erase the recorded messages one by one or all messages in a folder
at a time.
Note that once a recording has been erased, you cannot retrieve it.
at a time.
Note that once a recording has been erased, you cannot retrieve it.
Erasing messages one by one
When a message is erased, the remaining messages will advance and
renumbered so that there will be no space between messages.
renumbered so that there will be no space between messages.
To cancel erasing
Press xSTOP before step 2.
1
Press ERASE while playing back
the message you want to erase
or press ERASE for more than 1
second during stop mode.
A beep will sound and the message
number and “ ERASE” will flash
while the first and last 5 seconds of
the message are played back 10
times.
or press ERASE for more than 1
second during stop mode.
A beep will sound and the message
number and “ ERASE” will flash
while the first and last 5 seconds of
the message are played back 10
times.
2
Press ERASE while the message is
being played back.
The message is erased and the
remaining messages will be
renumbered. (For example, if you
erase Message 3, Message 4 will be
renumbered as Message 3. When
erasing is completed, the unit will
stop at the beginning of the
following message.)
The message is erased and the
remaining messages will be
renumbered. (For example, if you
erase Message 3, Message 4 will be
renumbered as Message 3. When
erasing is completed, the unit will
stop at the beginning of the
following message.)
Erase Message 3
Message 1 Message 2 Message 3 Message 4
Before erasing
After erasing
Remaining messages are renumbered.
Message 1
Message 4 Message 5
Message 2 Message 3
Continued
20
GB
Erasing all messages in a folder
2
While pressing xSTOP,
press ERASE for more
than 1 second.
“ ALL ERASE” will flash
for 10 seconds.
press ERASE for more
than 1 second.
“ ALL ERASE” will flash
for 10 seconds.
To cancel erasing
Press xSTOP before step 3.
Erasing Messages (continued)
To erase other messages
Repeat steps 1 and 2.
To erase a message partially
First divide the message by adding an index (see page 23) and then follow
the steps on page 19 to erase the message.
the steps on page 19 to erase the message.
e.g.
Folder A
Folder A
Folder B
Message 1 Message 2 Message 3
Blank space
Blank space
Message 1 Message 2
Message 3
Message 1 Message 2
Message 3
3
While the display is
flashing, press ERASE.
flashing, press ERASE.
1
Press FOLDER to
select the folder you
want to erase.
select the folder you
want to erase.
Click on the first or last page to see other ICD-B10 / ICD-B15 service manuals if exist.