Read Sony ICD-35 / ICD-55 Service Manual online
– 18 –
Pin No.
Pin Name
I/O
Function
74
XBCK
O
DSP bit clock signal output to the MSM7590L (IC101)
75
RTCDI
I
Serial data input from the RS5C348A (IC703)
76
RTCDO
O
Serial data and DSP register control data output to the RS5C348A (IC703)
77
RTCCLK
O
Serial data and DSP register control data transfer clock signal output to the RS5C348A (IC703)
78
IC
—
Fixed at “L”
79
X2
O
Main system clock output terminal (5 MHz)
80
X1
I
Main system clock input terminal (5 MHz)
81
VDD1
—
Power supply terminal (+3.3V)
82
XT1
I
Sub system clock input terminal (32.768 kHz)
83
XT2
O
Sub system clock output terminal (32.768 kHz) Not used (open)
84
XRESET
I
System reset signal input from the reset signal generator (IC505) “L”: reset
For several hundreds msec. after the power supply rises, “L” is input, then it changes to “H”
For several hundreds msec. after the power supply rises, “L” is input, then it changes to “H”
85
SYNCIN
I
Interrupt input terminal of the DSP X (R) sync
86
WAKEUP
I
Key interruption processing start signal input terminal
87
RTCINT
I
Interrupt input from the RS5C348A (IC703) (2 Hz)
88
—
O
Not used (open)
89
LPMODE
O
Filter selection signal output terminal “L”: SP mode, “H”: LP mode
90
AVREFO
O
Reference voltage output terminal (for A/D converter)
91 to 98
FMIO0 to FMIO7
I/O
Two-way data bus with the flash memory (IC702) (bit 0 to bit 7)
99
AVSS
—
Ground terminal (for A/D converter)
100
BATT
I
Dry battery voltage detection signal input terminal (A/D input)
Click on the first or last page to see other ICD-35 / ICD-55 service manuals if exist.