Read Sony HTP-78SS / HT-SF1100 / HT-SS1100 / STR-KS1100 Service Manual online
STR-KS1100
8
S.F. CLEAR MODE
The preset sound field is cleared when this mode is activated. Use
this mode before returning the product to clients upon completion
of repair.
Procedure:
this mode before returning the product to clients upon completion
of repair.
Procedure:
1. While pressing the [SOUND FIELD +] button, press the
I/
1
button to turn on the main power.
2. The message “S.F. CLR.” appears and initialization is
performed.
VERSION MODE
When this mode is used, the model, the destination and the software
version number are displayed.
Procedure:
version number are displayed.
Procedure:
1. While pressing the [SOUND FIELD +] and [PRESET TUNING --]
buttons, press the
I/
1
button to turn on the main power.
2. The model, the destination and the software version number
appear.
FL CHECK MODE
All fluorescent segments are tested. When this test is activated, all
segments turn on at the same time, then each segment turns on one
after another.
Procedure:
segments turn on at the same time, then each segment turns on one
after another.
Procedure:
1. While pressing the [PRESET TUNING +] and [PRESET TUNING --]
buttons, press the
I/
1
button to turn on the main power.
2. All segments and [VIDEO 1], [DVD], [TV] LEDs turn on.
3. Press the [INPUT SELECTOR] button.
4. Half of segments and [DMPORT], [VIDEO 2/BD], [SA-CD/CD]
3. Press the [INPUT SELECTOR] button.
4. Half of segments and [DMPORT], [VIDEO 2/BD], [SA-CD/CD]
LEDs turn on.
5. Press the [INPUT SELECTOR] button once again.
6. Others half of segments and [SAT], [TUNER] LEDs turn on.
7. Press the [INPUT SELECTOR] button once again.
8. All segments and all LEDs turn off.
6. Others half of segments and [SAT], [TUNER] LEDs turn on.
7. Press the [INPUT SELECTOR] button once again.
8. All segments and all LEDs turn off.
KEY CHECK MODE
This mode is used to check the key.
Procedure:
Procedure:
1. While pressing the [MUTING] and [INPUT SELECTOR] buttons,
press the
I/
1
button to turn on the main power.
2. The message “REST 06” appears.
3. Every pressing of any button other than the
3. Every pressing of any button other than the
I/
1
button counts
down the buttons. The buttons which are already counted once
SWAP ALL MODE
When this mode is used, output the audio signal of front L/R channel
to all channel.
Procedure:
to all channel.
Procedure:
1. While pressing the [PRESET TUNING +] and [MUTING] buttons,
press the
I/
1
button to turn on the main power.
2. The message “SWP. ALL” appears .
3. Each time [PRESET TUNING +] or [PRESET TUNING --] button
3. Each time [PRESET TUNING +] or [PRESET TUNING --] button
is pressed, output channel is switched.
SHIPMENT MODE
All preset contents are cleared when this mode is activated. Use
this mode before returning the product to clients upon completion
of repair.
Procedure:
this mode before returning the product to clients upon completion
of repair.
Procedure:
1. While pressing the [PRESET TUNING +] and [INPUT SELECTOR]
buttons, press the
I/
1
button to turn on the main power.
2. The message “CLEARED” appears.
PROTECTOR AUTO OFF MODE
When this mode is used, a protector on state is maintainable.
Procedure:
Procedure:
1. While pressing the [SOUND FIELD +] and [SOUND FIELD --]
buttons, press the
I/
1
button to turn on the main power.
2. The message “PROT. EVER” appears.
VACS OFF MODE
This mode is used to switch off the VACS (Variable Attenuation
Control System).
Procedure:
Control System).
Procedure:
1. Press the buttons of standard commander (RM-AAU002) (PART
No. : 1-479-148-11 ) in order of [TUNER]
→
[JUMP]
→
[JUMP]
→
[JUMP]
→
[MASTER VOL +]
→
[3].
2. The message “VACS OFF” appears and the switch off the
VACS.
DCAC TEST MODE
Procedure:
1. While pressing the [SOUND FIELD +] and [INPUT SELECTOR]
buttons, press the
I/
1
button to turn on the main power.
2. The following content is displayed on the fluorescent indicator
tube, and DCAC test mode is started.
When the error happens, the following content is displayed
on the fluorescent indicator tube.
on the fluorescent indicator tube.
3. Connect front L-ch speaker of receiver and AUTO CAL
microphone.
4. Press the [SOUND FIELD +] button, there will be test tone sound
output from front L-ch speaker, and the following content is
displayed on the fluorescent indicator tube.
displayed on the fluorescent indicator tube.
SECTION 3
TEST MODE
DCAC FTM
ERR SD0X
1: Abnormality of D1502 or R1100
2: Abnormality of D1501
3: Abnormality of D1500
2: Abnormality of D1501
3: Abnormality of D1500
AD - XXX
figure of 0 to 255
(depends on loudness of test tone)
(depends on loudness of test tone)
Click on the first or last page to see other HTP-78SS / HT-SF1100 / HT-SS1100 / STR-KS1100 service manuals if exist.