Read Sony HTP-36SS / HT-SS1000P / STR-KS1000P Service Manual online
3
STR-KS1000P
SECTION 1
GENERAL
This section is extracted from
instruction manual.
instruction manual.
LOCATION OF CONTROLS
Description and location of parts
Front panel
Getting Started
Receiver
VIDEO 1
VIDEO 2
DVD
SA-CD/CD
TUNER
PRESET TUNING
SOUND FIELD
MUTING
AUTO CAL MIC
MASTER VOLUME
1
5
2
4
6
3
q;
9
8
7
INPUT SELECTOR
?/1
Name
Function
A ?
/
1
Press to turn the receiver
on or off.
on or off.
B
Display
The current status of the
selected component or a
list of selectable items
appears here.
selected component or a
list of selectable items
appears here.
C
Input lamps
The lamp of the chosen
input source lights up.
input source lights up.
D
Remote sensor
Receives signals from
remote commander.
remote commander.
E
INPUT
SELECTOR
SELECTOR
Press to select the input
source to playback.
source to playback.
F
MUTING
Press to mute the sound.
Name
Function
G
MASTER
VOLUME
VOLUME
Turn to adjust the volume
level of all speakers at the
same time.
level of all speakers at the
same time.
H
AUTO CAL MIC
jack
jack
Connects to the supplied
ECM-AC2 optimizer
microphone for the Auto
Calibration function.
ECM-AC2 optimizer
microphone for the Auto
Calibration function.
I
SOUND FIELD
+/–
Press to select a sound
field.
field.
J
PRESET TUNING
+/–
+/–
Press to select a preset
station.
station.
About the indicators on the display
L
C
R
SL
SR
SW
D.RANGE
RDS
ST MONO
MEMORY
S
SLEEP
DIGITAL
DTS
PL
LFE
OPT COAX
2
1
3
4
5
6
7
8
9
q;
qa
qs
qd
Name
Function
A
Lights up when the disc being
played back contains an LFE
(Low Frequency Effect) channel
and the LFE channel signal is
actually being reproduced.
played back contains an LFE
(Low Frequency Effect) channel
and the LFE channel signal is
actually being reproduced.
B
SLEEP
Lights up when the sleep timer is
activated.
activated.
C
Playback
channel
indicators
channel
indicators
L
R
C
SL
SR
S
The letters (L, C, R, etc.) indicate
the channels being played back.
The boxes around the letters vary
to show how the receiver
downmixes the source sound.
Front Left
Front Right
Center (monaural)
Surround Left
Surround Right
Surround (monaural or the
surround components obtained
by Pro Logic processing)
Example:
Recording format (Front/
Surround): 3/2.1
Sound Field: A.F.D. AUTO
the channels being played back.
The boxes around the letters vary
to show how the receiver
downmixes the source sound.
Front Left
Front Right
Center (monaural)
Surround Left
Surround Right
Surround (monaural or the
surround components obtained
by Pro Logic processing)
Example:
Recording format (Front/
Surround): 3/2.1
Sound Field: A.F.D. AUTO
D ;
DIGITAL
Lights up when Dolby Digital
signals are input.
Note
When playing a Dolby Digital
format disc, be sure that you have
made digital connections and the
audio input mode for VIDEO 2
input or SA-CD/CD input is not
set to “V2 ANLG” or “CD
ANLG”.
signals are input.
Note
When playing a Dolby Digital
format disc, be sure that you have
made digital connections and the
audio input mode for VIDEO 2
input or SA-CD/CD input is not
set to “V2 ANLG” or “CD
ANLG”.
LFE
L
C
R
SL
SR
SW
Name
Function
E
Preset
station
indicators
station
indicators
Lights up when using the
receiver to tune in radio stations
you have preset. For details on
presetting radio stations.
receiver to tune in radio stations
you have preset. For details on
presetting radio stations.
F
D.RANGE
Lights up when dynamic range
compression is activated.
compression is activated.
G
Tuner
indicators
indicators
Lights up when using the
receiver to tune in radio stations,
etc.
receiver to tune in radio stations,
etc.
H
MEMORY
Lights up when a memory
function, such as Preset Memory,
etc., is activated.
function, such as Preset Memory,
etc., is activated.
I
COAX
Lights up when the DVD input is
selected.
selected.
J
OPT
Lights up when
– audio input mode for VIDEO 2
– audio input mode for VIDEO 2
input is set to “V2 AUTO” and
the source signal is a digital
signal being input through
VIDEO 2 OPT IN jack.
the source signal is a digital
signal being input through
VIDEO 2 OPT IN jack.
– audio input mode for SA-CD/
CD input is set to “CD AUTO”
and the source signal is a
digital signal being input
through SA-CD/CD OPT IN
jack.
and the source signal is a
digital signal being input
through SA-CD/CD OPT IN
jack.
– audio input mode for VIDEO 2
input or SA-CD/CD input is set
to “V2 OPT” or “CD OPT”.
to “V2 OPT” or “CD OPT”.
Name
Function
K ;
PL(
II
)
Lights up when the receiver
applies Pro Logic processing to 2
channel signals in order to output
the center and surround channel
signals. “; PLII” lights up
when the Pro Logic II Movie/
Music decoder is activated.
Note
Dolby Pro Logic and Dolby Pro
Logic II decoding do not
function for DTS format signals.
applies Pro Logic processing to 2
channel signals in order to output
the center and surround channel
signals. “; PLII” lights up
when the Pro Logic II Movie/
Music decoder is activated.
Note
Dolby Pro Logic and Dolby Pro
Logic II decoding do not
function for DTS format signals.
L
DTS
Lights up when DTS signals are
input.
Note
When playing a DTS format
disc, be sure that you have made
digital connections and the audio
input mode for VIDEO 2 input
or SA-CD/CD input is not set to
“V2 ANLG” or “CD ANLG”.
input.
Note
When playing a DTS format
disc, be sure that you have made
digital connections and the audio
input mode for VIDEO 2 input
or SA-CD/CD input is not set to
“V2 ANLG” or “CD ANLG”.
M
SW
Lights up when the audio signal
is output from the
SUBWOOFER jack.
is output from the
SUBWOOFER jack.
Rear panel
U
ANTENNA
AM
DVD
COAX IN
OPT IN
SA-CD/CD
OPT IN
VIDEO 2
DIGITAL
SA-CD/CD
AUDIO IN
VIDEO 2
AUDIO IN
VIDEO 1
AUDIO IN
L
R
L
R
FRONT R
– +
FRONT L
– +
– +
– +
– +
– +
SUR R
SUR L
CENTER SUBWOOFER
1
2
4
3
A
ANTENNA section
FM
ANTENNA
Connects to the
FM wire antenna
supplied with this
receiver.
FM wire antenna
supplied with this
receiver.
AM
ANTENNA
ANTENNA
Connects to the
AM loop antenna
supplied with this
receiver.
AM loop antenna
supplied with this
receiver.
B
AUDIO INPUT section
AUDIO IN
jack
jack
Connects to a
satellite tuner, CD
player, etc.
satellite tuner, CD
player, etc.
C
SPEAKER section
Connects to speakers.
The following table shows
the respective color for the
speaker jacks.
The following table shows
the respective color for the
speaker jacks.
White (L)
Red (R)
Speaker jack
Color
FRONT R
(Front right speaker)
Red
FRONT L
(Front left speaker)
White
SUR R
(Surround right speaker)
Grey
SUR L
(Surround left speaker)
Blue
CENTER
(Center speaker)
Green
SUBWOOFER
(Sub woofer)
Purple
D
DIGITAL INPUT section
OPTICAL
IN jack
IN jack
Connects to a DVD
player, etc. The COAX
IN jack provides a better
quality of loud sound.
player, etc. The COAX
IN jack provides a better
quality of loud sound.
COAXIAL
IN jack
IN jack
Click on the first or last page to see other HTP-36SS / HT-SS1000P / STR-KS1000P service manuals if exist.