Read Sony HT-XT100 Service Manual online
HT-XT100
18
HOTEL MODE
The hotel mode can be performed.
(This mode is used by hotel equipment administrator)
The hotel mode can be performed.
(This mode is used by hotel equipment administrator)
Note: At the same time it is cannot perform the demo mode (page 17).
Procedure:
1. Press the [
1. Press the [
@
/1
] button to turn the power on.
2. Press two buttons of the [
@
/1
] and [VOL
−] simultaneously for
5 seconds.
3. The message “HOTEL” is displayed on the screen display
panel.
Screen display
Blinking
4. Press the [ENTER] button on the remote commander, the mes-
sage “OFF” (current setting) is displayed on the screen display
panel.
panel.
5. Select the “ON” to press the [
V]/[v] buttons on the remote
commander, and press the [ENTER] button on the remote
commander.
commander.
6. Changed to hotel mode “ON”, and return to the normal display.
7. Press two buttons of the [
7. Press two buttons of the [
@
/1
] and [VOL
−] simultaneously for
5 seconds.
8. The message “HOTEL” is displayed on the screen display
panel.
9. Select the “MAXVL” to press the [
V]/[v] buttons on the re-
mote commander, and press the [ENTER] button on the re-
mote commander.
mote commander.
Screen display
Blinking
Note: If hotel mode is “OFF”, “MAXVL” cannot be selected (not dis-
played).
10. The message “VOL50” (current setting) is displayed on the
screen display panel.
Screen display
Blinking
11. Select the maximum volume setting (0 to 50) to press the [
V]/
[
v] buttons on the remote commander, and press the [ENTER]
button on the remote commander.
12. Maximum volume setting of the hotel mode is complete, return
to the normal display.
Initial setting for hotel mode:
When the power is turned on, volume is changed to “0”.
Maximum volume will be changed to the settings value (default
“50”) for step 11.
When the power is turned on, volume is changed to “0”.
Maximum volume will be changed to the settings value (default
“50”) for step 11.
Releasing method:
Perform the “FACTORY RESET” (page 17). Or the step 5 of this
mode settings to select the “OFF” and press the [ENTER] button
on the remote commander.
Perform the “FACTORY RESET” (page 17). Or the step 5 of this
mode settings to select the “OFF” and press the [ENTER] button
on the remote commander.
Note: The hotel mode does not release by unplug the AC cord.
Click on the first or last page to see other HT-XT100 service manuals if exist.