HT-ST7 - Sony Audio Service Manual (repair manual). Page 2

Read Sony HT-ST7 Service Manual online

HT-ST7
2
NOTES  ON  CHIP  COMPONENT  REPLACEMENT
• 
Never reuse a disconnected chip component.
• 
Notice that the minus side of a tantalum capacitor may be dam-
aged by heat.
SAFETY  CHECK-OUT
After correcting the original service problem, perform the follow-
ing safety check before releasing the set to the customer:
Check the antenna terminals, metal trim, “metallized” knobs, 
screws, and all other exposed metal parts for AC leakage.
Check leakage as described below.
LEAKAGE  TEST
The AC leakage from any exposed metal part to earth ground and 
from all exposed metal parts to any exposed metal part having a 
return to chassis, must not exceed 0.5 mA (500 microamperes.). 
Leakage current can be measured by any one of three methods.
1.  A commercial leakage tester, such as the Simpson 229 or RCA 
WT-540A. Follow the manufacturers’ instructions to use these 
instruments.
2.  A battery-operated AC milliammeter. The Data Precision 245 
digital multimeter is suitable for this job.
3.  Measuring the voltage drop across a resistor by means of a 
VOM or battery-operated AC voltmeter. The “limit” indication 
is 0.75 V, so analog meters must have an accurate low-voltage 
scale. The Simpson 250 and Sanwa SH-63Trd are examples 
of a passive VOM that is suitable. Nearly all battery operated 
digital multimeters that have a 2 V AC range are suitable. (See 
Fig. A)
1.5 k
Ω
0.15 
μF
AC
voltmeter
(0.75 V)
To Exposed Metal
Parts on Set
Earth Ground
Fig. A.  Using an AC voltmeter to check AC leakage.
SAFETY-RELATED  COMPONENT  WARNING!
COMPONENTS  IDENTIFIED  BY  MARK  
0  OR  DOTTED  LINE  
WITH  MARK  
0  ON  THE  SCHEMATIC  DIAGRAMS  AND  IN  
THE  PARTS  LIST  ARE  CRITICAL  TO  SAFE  OPERATION.
REPLACE  THESE  COMPONENTS  WITH  SONY  PARTS 
 
WHOSE  PART  NUMBERS  APPEAR  AS  SHOWN  IN  THIS  
MANUAL  OR  IN  SUPPLEMENTS  PUBLISHED  BY  SONY.
ATTENTION  AU  COMPOSANT  AYANT  RAPPORT  
À  LA  SÉCURITÉ!
LES  COMPOSANTS  IDENTIFIÉS  PAR  UNE  MARQUE  
0  SUR  
LES  DIAGRAMMES  SCHÉMATIQUES  ET  LA  LISTE  DES  
PIÈCES  SONT  CRITIQUES  POUR  LA  SÉCURITÉ  DE  FONC-
TIONNEMENT.  NE  REMPLACER  CES  COMPOSANTS  QUE  
PAR  DES  PIÈCES  SONY  DONT  LES  NUMÉROS  SONT  DON-
NÉS  DANS  CE  MANUEL  OU  DANS  LES  SUPPLÉMENTS  
PUBLIÉS  PAR  SONY.
This system incorporates Dolby* Digital and the DTS** Digital Surround 
System.
* Manufactured under license from Dolby Laboratories.
Dolby, and the double-D symbol are trademarks of Dolby Laboratories.
** Manufactured under license under U.S. Patent Nos: 5,956,674; 
5,974,380; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 7,392,195; 
7,272,567 & other U.S. and worldwide patents issued & pending. DTS-
HD, the Symbol, & DTS-HD and the Symbol together are registered 
trademarks & DTS-HD Master Audio is a trademark of DTS, Inc. 
Product includes software. © DTS, Inc. All Rights Reserved.
The BLUETOOTH
®
 word mark and logos are registered trademarks owned 
by Bluetooth SIG, Inc. and any use of such marks by Sony Corporation is 
under license.
This system incorporates High-Definition Multimedia Interface (HDMI™) 
technology. 
The terms HDMI and HDMI High-Definition Multimedia Interface, and the 
HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC 
in the United States and other countries.
“BRAVIA” logo is a trademark of Sony Corporation.
“x.v.Color” and “x.v.Color” logo are trademarks of Sony Corporation.
The N Mark is a trademark or registered trademark of NFC Forum, Inc. in the 
United States and in other countries.
Android is a trademark of Google Inc.
© 2012 CSR plc and its group companies.
The aptX® mark and the aptX logo are trade marks of CSR plc or one of its 
group companies and may be registered in one or more jurisdictions.
Other trademarks and trade names are those of their respective owners.
Copyrights
Accesseries
Design and specifications are subject to change without notice 
Standby power consumption: 0.5 W 
or less (Bar Speaker), 0.5 W or less 
(Subwoofer)
Over 85% power efficiency of 
amplifier block is achieved with the 
full digital amplifier, S-Master.
Video formats supported by the system
Input/Output (HDMI Repeater block)
File
2D
3D
Frame 
packing
Side-by-
Side (Half)
Over-Under 
(Top-and-
Bottom)
4096 × 2160p @ 23.98/24 Hz
3840 × 2160p @ 29.97/30 Hz
3840 × 2160p @ 25 Hz
3840 × 2160p @ 23.98/24 Hz
1920 × 1080p @ 59.94/60 Hz
1920 × 1080p @ 50 Hz
1920 × 1080p @ 29.97/30 Hz
1920 × 1080p @ 25 Hz
1920 × 1080p @ 23.98/24 Hz
1920 × 1080i @ 59.94/60 Hz
1920 × 1080i @ 50 Hz
1280 × 720p @ 59.94/60 Hz
1280 × 720p @ 50 Hz
1280 × 720p @ 29.97/30 Hz
1280 × 720p @ 23.98/24 Hz
720 × 480p @ 59.94/60 Hz  
720 × 576p @ 50 Hz
640 × 480p @ 59.94/60 Hz 
Grille frame (1)
Remote control (1)
R03 (size AAA) batteries (2)
Digital optical cable for a TV (1)
IR blaster (1)
Stands (2) and screws (2)
Wireless transceivers (2)
Operating Instructions (1)
Reference Guide (1)
Information regarding environment-friendly products
Page of 90
Display

Click on the first or last page to see other HT-ST7 service manuals if exist.